Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

My Air Helmet - RIP

Posts

My Air Helmet - RIP

#1

My Air Helmet - RIP

Bill Grumbine (Kutztown PA)

Saturday I posted about an incident in my shop with my air helmet. I am posting this in a new thread because while I tend to look at things in a humorous light, this is something I take very seriously.

In 1997 I bought a Racal AH-5 air helmet. I paid $525 for it, or something very close to that. I wanted something that would work well, but my main criterion was that it actually fit my head. The AH-5 was the only option on the market. In those days, with a young family and a fairly new business, that was a very hard expense to absorb. But we thought it would be worth it. While it has been a very robust unit, it has needed some maintenance over the years. It needed filters of course, and the occasional face plate replaced. Once I dropped it and broke one of the hinges that move the visor. I bought some and built some batteries. At one point I upgraded the charger to the smart charger. Last November, very close to its 12th birthday, I finally had to spring for a new motor and fan assembly. The only thing left was the helmet itself. One very small but important component of that assembly failed on Saturday, giving rise to my humorous but somewhat serious predicament.

Today the unit is known as the 3M Airstream 400. I just got off the phone from ordering a new shell. The shell is the helmet and visor portion of the unit, minus the motor. I could have ordered a "short block" shell, but I did not want to be bothered with transferring all the little bits and pieces, especially with the risk of breaking something at the last minute before I leave for NC. Once it arrives, there will be nothing left of my original helmet, although I will be keeping the old one for parts I may need from time to time. Looking back on the whole thing, and doing a rough estimation for cost, I figure this thing has cost me about $100 - $120 per year to own. That works out to $10.00/month or less.

I write this because I do not have certain things. I do not have the lung or nasal problems many woodworkers who breathe dust have. I do not have scars, and the memory of pain and suffering that some folks I know have had who have suffered impacts to their faces. I don't have as much ready cash as I would like either, but the cash is a happy loss for the safety and security this helmet has provided. People write me all the time. I'll bet I get at least one email a week asking about my helmet - where to get it, how much it is, would I buy it again. For all intents and purposes, I just did. And I am glad to do it.

What is your health worth? How about your comfort? Is it worth $10.00/month to you?

Re: My Air Helmet - RIP

#2

Ted Calver

Re: My Air Helmet - RIP

Ted Calver

Whew!! For a minute I thought I was going to read about you administering a cowboy coup-de-grace to your wounded helmet with that .44 mag! It ain't right to let your air helmet suffer! :) See....there is a good reason to carry in the shop :D

Re: My Air Helmet - RIP

#3

Re: My Air Helmet - RIP

Bernie Weishapl

Bill I have been using the Trend and it hasn't been what I thought it was. I developed a bad sinus infection for the 3rd or 4th time. So today after reading and talking with people I ordered the 3M Airstream 400. Pricey yes it was but the doctor told me you only have one set of lungs. She said the helmet would be a lot cheaper than a sinus operation or a lung transplant. Point taken.

Re: My Air Helmet - RIP

#4

Re: My Air Helmet - RIP

Jim Sebring

I've had a Racal Airmate 3 since 1992. I haven't used it as hard as Bill has his slightly later version but it has allowed me to keep air going in and out without collecting a lot of dust along the way. I'm continually amazed at the lack of quality safety gear in the woodworking retail stores. That lack is especially bad for us turners where we're up close to lots of dust most of the time.

Unfortunately, many turners think they're still invincible 20 year olds and don't even put on face shields. That's like going to the shooting range without hearing protection. 120 db out of a center fire handgun WILL cause permanent hearing loss within about 39 nanoseconds after the trigger is pulled.

Re: My Air Helmet - RIP

#5

Re: My Air Helmet - RIP

Matt Overton

Bill,

I have the same Racal helmet. I just rep;aced the battery. I agree with all your points. Safety is the one thing no one should skimp on.

Re: My Air Helmet - RIP

#6

Re: My Air Helmet - RIP

John K Jordan

Bernie, I have the Trend also and although I liked it at first I became unimpressed with the level of filtration. I use an industrial respirator when sanding.

Re: My Air Helmet - RIP

#7

Re: My Air Helmet - RIP

bowlman

Bill and others,

I purchased my Racal Airstream in the mid to late 80's and its still going strong. When purchased new, this unit, with charger and extra battery was something like $600 ... an extremely expensive piece of equipment to justify when I had only been turning for 7 years or so. However, since my turning was set up as a side business, I could depreciate it at take the tax break.

Yes, I have had to have it rebuilt, but only once. And yes, I did upgrade to the smart charger. The best 2 tips I can give you are these: if you are a smoker, STOP. Go to your doctor and ask for an Rx for Chantix. I smoked a pack a day for 45 years, off and on, mostly on. I am now an ex-smoker. My lungs feel better, my Hoosier sinuses are better and I no longer hack, cough, sputter and make other scary noises when I breathe. I know its hard but a lung transplant is just way too expensive!

Second, protect your lungs at all costs. Get a unit like the 3M that Bill mentions. Get the HEPA filters as well. Then be sure to use it, especially when sanding, though I use mine nearly all the time (exceptions being when I do a demo).

Bill, my helmet also fits very ... uh, snugly ... sometimes too much so, and your description of getting stuck struck a chord ... don't ask me how I know this ...

Re: My Air Helmet - RIP

#8

Re: My Air Helmet - RIP

Bill Grumbine (Kutztown PA)

Bernie, you are going to love it! The only thing that would make mine better was if they gave me a commission for all the ones I have sold for them over the years! :D

Re: My Air Helmet - RIP

#9

Well said

Terry Quiram

Almost 20 years ago I purchased an AirMate3 to save myself from all the dust I produced while scroll sawing. My unit has the hard hat and a soft Tyvek hood. I finally had to replace the batteries 2 years ago. I agree with your statement. What is your health worth?

Re: My Air Helmet - RIP

#10

Steve Kubien

Where to get one?

Steve Kubien

I just looked over the usual suspects, (Woodcraft, CraftSupplies and Packard) and no love for the Airstream. Where does one go to find one?

Re: My Air Helmet - RIP

#12

So... help me with then..

Randy Gleckler

Why this 3m one over the Triton? I see many of the reason's people aren't happy with the Trend. but why is the Triton one an issue (besides it's hard to find right now?)

Re: My Air Helmet - RIP

#13

Replacement batteries

Jim Sebring

Replacement batteries for these 3M/Racal helments are pretty costly. The two sources I've checked want between $100 and $125 for a new pack.

I had one of my two packs rebuilt last year at an outfit called "Batteries Plus". I think it's a franchise chain. Total cost was $38 and some change! The parts they replaced were two NiCad 'C' cells.

Re: My Air Helmet - RIP

#14

Re: So... help me with then..

Bill Grumbine (Kutztown PA)

Randy, I do not own a Triton, but I several friends and acquaintances who do. Probably the universal complaint I have heard is how long it takes to get the thing on and off. My Airstream, for such it is now, goes on and off in seconds. The Trition is like putting on armor. Second, the rounded face shield seems to cause visual distortion that annoys some people. But the main thing seems to be how easy (or not) it is to get on and off.

Re: My Air Helmet - RIP

#15

Steve Kubien

Re: Where to get one?

Steve Kubien

Whoa! Not only sitting down but have a competent cardiologist handy as well!

Re: My Air Helmet - RIP

#16

Re: Replacement batteries

Halsey

http://www.mtobattery.com/store/ I have had good service for this place. Just a satisfied customer. Halsey

Re: My Air Helmet - RIP

#17

Re: Where to get one?

Bill Grumbine (Kutztown PA)

I take it you didn't order one? :b

Re: My Air Helmet - RIP

#18

Re: So... help me with then..

bowlman

When I purchased my Racla, now 3M, Airstream, there were no other options. No Trend, no snorkels, no nothing ...

Re: My Air Helmet - RIP

#19

Re: Where to get one?

Bob Macgregor

I went to the 3M Canada website and looked up the Airstream (its in safety equipment, respiratory). Then, when I clicked on the where-to-buy-this box, it suddenly bumped me back to a form asking me to put in my zip code or choose a state...and it wouldn't accept Canadian postal codes nor were any Canadian provinces on their list. Not a very friendly site, that!

Anyway, I took this to mean that you can buy Scotch tape from a Canadian vendor, but you have to order an Airstream from a US supplier.

BOB

Re: My Air Helmet - RIP

#20

Re: Replacement batteries

Don at Central Illinois

I took my battery pack for my Vivitar flash unit to Batteries Plus and had it refurbished for about $30 instead of sending it in for over $100.