Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Monster Laser Upgrade

Posts

Monster Laser Upgrade

#1

Bill Blasic

Monster Laser Upgrade

Bill Blasic

Anyone who has the Monster Articulated Hollowing System laser might be interested in a new modification to the laser system. I just received mine back from Randy Privett and I'm floored as how much better this has made the lasers use. For approximately $30 it makes the laser easier to adjust and gives less vibration possibilities. If you might be interested e-mail Randy at SuperiorDesign@comcast.net for more info. Just a heads up to a great upgrade.

Bill

Re: Monster Laser Upgrade

#2

Re: Monster Laser Upgrade

Stuart Johnson

Bill, what type of corrections were made? Can you post a photo?

Re: Monster Laser Upgrade

#3

Bill Blasic

Re: Monster Laser Upgrade

Bill Blasic

Stuart,

Randy added a support piece that just makes the laser a lot more stable. I don't have a picture at the moment but Randy probably does. Give him an email or call. I have been using the system for about 5+ months without a problem and I can't believe how much better this upgrade makes it.

Bill

Re: Monster Laser Upgrade

#4

Re: Monster Laser Upgrade

charlie belden

Here's a link to what I think is the new laser set up

http://monster-lathe-tools.com/cart.php?target=product&product_id=292&substring=laser

The price stated is $159. How do owners of the Monster or MiniMonster get the special upgrade deal?

BTW - why'd you send your unit back?

Re: Monster Laser Upgrade

#5

Re: Monster Laser Upgrade

Randy Privett

Charlie,

Bill and I were talking and I had mentioned that I was upgrading the laser system, he sent his laser clamps for me to modify. As you have probably noticed, during the in and out adjustment, if you loosen the clamp too much, sometimes the tip of the laser dips down a bit, making it harder to adjust. This modification takes care of that and helps stabilize the laser bar when cutting. People are sending their laser clamps back to me and I have to re-machine them for the fitting of the bar and pads.