Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Finally got some finish applied

Posts

Finally got some finish applied

#1

Finally got some finish applied

Paul Zerjay

It got warm enough yesterday to get some lacquer sprayed on a few pieces. I have a lot more to go. I hope the weather cooperates for a few more days.

Thanks for looking


Re: Finally got some finish applied

#2

Re: Finally got some finish applied

Bill Clark

Beautiful pieces Paul. Like you, I'm waiting for some warmer weather to finish some of my pieces I turned this last winter. Hope mine turn out as nice as yours did. Well done.

Re: Finally got some finish applied

#3

Re: Finally got some finish applied

fgvanatta

Very beautiful and well proportioned pieces.

Frank

Re: Finally got some finish applied

#4

Hollowed, Size, Sequence?  Lots of Q

Henry (Raleigh, NC)

Paul - Very nice work. I aspire to turn such well proportioned pieces.

I just read that for well proportioned pieces that it is difficult to judge the size from a picture. That is certainly the case here - I can't tell if these are 2" or 8" tall. Can you give me some sense for the size?

Since I aspire to try something like this, can you help me with some process related questions?

- Do you turn and finish the finials, and then attach to the 'base piece'? Or attach and then turn finial?

- Is the base piece hollowed? And the even more basic question: Why, or why not?

- What are the materials - i.e. ebony or finished with black?

Sorry for the basic questions, but inquiring minds have a need for info.

Beautiful work. If nothing else you have inspired me to try something different. I am a very inexperienced turner - but willing to try things. So far my finial attempts have become shorter and shorter, until they are unusable.

Henry

hwynands@ieee.org

Re: Finally got some finish applied

#5

Re: Finally got some finish applied

Dan Oliphant

Paul, all three pieces look great. Would you be so kind as to share what light source you used on these pics and what distance was the light source from the turnings?

Your pictures are outstanding in my opinion.

Re: Finally got some finish applied

#6

Steve Kubien

Re: Finally got some finish applied

Steve Kubien

I certainly like them all but the first one really grabs me. I've never been a huge fan of the hollowform-on-tall-thin-spindle motif. Tha's just my opinion, of course. Not a fan, but certainly admire the skill.

Definately worth the wait.

Steve

Re: Finally got some finish applied

#7

Great job!

Ray Carson - Lawrenceville, NJ

The third turning with the natural edge is AWESOME !!!! All are very nice.

Re: Finally got some finish applied

#8

Re: Finally got some finish applied

Paul Zerjay

Thanks for all the compliments guys.

Henry

These are all between 6" and 8" in dia. The Maple was a 6"x3" blank. All of these are hollow. I turn green, dry, turn a 2nd time to true it up, and then turn the finial, which is removable. These finials, and the pedestal are African Blackwood

Dan

I made a cheap light tent 3 foot cubed. It is set up under 2, 2x4 fluorescent lay in fixtures. I have a halogen 500 watt light set up about 18" from each top corner of the tent. I bought a gradient backdrop and use a canon s5is.

Hope this helps and thanks again.