Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

segmented turning

Posts

segmented turning

#1

segmented turning

amontgomery

I am looking for the formula associated with segmented turning. I know there is one to determine the angle that needs to be cut on each piece to ensure a tight glue up. Can someone help me with this. Also if anyone has any tips or tricks that may prove helpful they would be much appreciated. Thanks

Re: segmented turning

#2

Re: segmented turning

John Lucas

The formula is 360 divided by the number of segments divided by 2. The best tip I can give you is to buy Malcolm Tibbet's book on segmented turning. It is the best one I have read and covers all the issues and problems that deal with segmented turning. He also makes some DVD's I haven't seen these but knowing Malcolm I'll bet they are first class.

Re: segmented turning

#3

Re: segmented turning *LINK*

Guy Bratt

Here's another site that has good info. from Bill Kandler.

Biggest tip Take time to make very accurate angle cuts.


http://www.segmentedturning.com

Re: segmented turning

#4

Re: segmented turning *LINK*

Mike Foster

Kevin Neelly also has a good site with a lot of good information on segmenting. Take a look.


http://www.turnedwood.com/

Re: segmented turning

#6

Re: segmented turning

Jim DeLaney, Austintown, OH

You might want to check this site: http://quest42.co.uk/woodwork/Segment/Seg-Calc.htm

Re: segmented turning

#7

Re: segmented turning

Bill Youngblood

There are several computer design programs available. I think you can go to www.woodturnerpro.com and play with the program before buying it. You can design a piece and the program does the math for you. Good luck.