Laser Engraver + Jig + Turning = ? *LINK*
charlie belden
>Having spent a lot of years as what is now being called a "futurist", formerly known as forecasting, I can't stop looking out at, and trying to see beyond, the horizon. One of the things that's out there is the laser engraver (think ink jet printer and substitute a focused laser beam for ink - with the piece staying fixed and the "print head" doing all the moving). Computer driven laser engravers are becoming more and more accessible - some Kinkos copying centers already have them you can rent time on and our local woodworking store has one available for a nominal fee.
Laser engravers open up plenty of opportunities for turners - once you find a way to get around one small problem - focal length/depth of field. Above and below a laser beams focal length, the beam is out of focus - the effect being "blurring" and loss of crispness. With a depth of field of only about 0.10", curved surfaces present THE problem. Throw in a stepper motor to move the indexing jig gear - synched up with the laser's driver software and the whole laser engraving process could be automated.
Fortunately, a member of Silicon Valley Woodturners has solved THAT problem - with an indexing jig he made - the tricky parts made with - what else? - a laser engraver.
The attached link has the details of the jig and its use.
Note that the laser can burn/vaporize stuff to 256 different depths by changing the beam's power level and how many "pulses" you tell it to apply at each point. Give it a gray scale image and it will NOT burn if the value is WHITE and will pierce if the value is BLACK. Lighter means shallower, darker means deeper - "carving contours" with up to 255 "steps".
Now imagine if Graeme Priddle, or Terry Scott or Molly Winton or . . . could work out their pyrographic/vaporizing designs on a computer, and have the computer and the laser do the time consuming grunt work. Imagine Bin Pho, or J. Paul Fennel (sp?), Andi Wolfe or Ron Fleming being able to have the laser do most of the piercing, and even some of the carving.
Of course there will be details to work out - but think of the possibilities.
Have YOU got an idea of two that could exploit this idea?
Laser Engraving Jig



