Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Red Ceder

Posts

Red Ceder

#1

Red Ceder 

Tery Scott

> Red Cedar Splendour

This is one of those pieces of wood that you bring back on your travels from overseas and sit on it until one day you have the courage or the inspiration to attack it

It had Western Australian Red cedar written on it ,maybe some of you Aussies can confirm this before I write on the bottom

A pleasure to turn and even better to carve although the dust is real bad �. As everything turns red and I have a feeling I read somewhere this is one of the nasties

I made the mistake of sanding with oil to keep the dust down but when I first sprayed it found the slurry of read had etched its way into the end grain making it look dirty Had to take back to the lathe and re sand dry

350mm Diam

The back ground was cut with a hot scalpel then with a small brush Indian ink used a first for me a slow process

Even though I had the area under the leaves smooth to 600 grit (hours of sanding ) when I first oiled the timber to bring out the richness the back ground and leaves were lost together so the highlight I think is an improvement (also I couldn�t leave it round and brown could I

Comments welcome

Re: Red Ceder

#2

Australian Red Ceder

John K Jordan

>Very nice!

I see Australian Red Cedar (Toona ciliata) is a member of the Meliaceae family, same as sapele and mahogany. Evidently highly valued for furniture. I'll trade you wood from three eastern red cedar logs for one slab of that!

JKJ

Re: Red Ceder

#3

Re: Red Ceder

Carole Valentine

>Excellent, Terry. The leaves look perfect!

What do you use to sand the undercuts under the leaves? I am starting to think that carving is not my cup of tea just because of the sanding required in awkward places like that. I have been trying to figure out how to use my reciprocating carver as a tiny detail sander! LOL

Re: Red Ceder

#4

Re: Red Ceder

fgvanatta

>Beautifully done. The bowl pretty much speaks for itself - and very elegantly.

Frank

Re: Red Ceder

#5

Barb Siddiqui

Re: Red Ceder

Barb Siddiqui

>A beautiful piece Tery, and beautiful design decisions. Every turner aims for 'unique' and 'innovative.' You've made it, here!

Re: Red Ceder

#6

Re: Red Ceder

Tery Scott

>I have a stable of burrs and use the stone grinding bits that come with dremel kits in the dremel as bases for sanders that I stick papers onto

Or I make sanding sticks from wood sand to shape and glue or velcro on sandpaper

The best tool you can have is patience

Re: Red Ceder

#7

Re: Red Ceder

Jorge Casta�eda

>Carole,

I bought myself a bunch of carving tools one day in a yard sale, this was on the Badger Pond days so it's been a while, I did try a little and the same fear crept into my mind, How I am going to sand this and that?

so I did stop.

Flash forward, to 2005, We went to Spain to visit the town where my forefathers came from, In there I met a gentleman that made the most amazing carvings, and after watching him work for a while, I asked him how he sands his work, Sanding? why anyone would want to do that? I do not even keep sandpaper here, then he show me a couple of his tools, they were really scary sharp and then he took a couple swipes on the work he was doing and made me inspect it, sure enough, it was smooth as glass.

My set of carving tools is still seating there, but one of these days...

Go for it!

Re: Red Ceder

#8

Re: Red Ceder

Jorge Casta�eda

>Terry,

As usual your work is first class.

You keep making me to want to try this and that, today I want to start carving, I procrastinated that too long.

Thanks for sharing

Jorge

Re: Red Ceder

#9

Re: Red Ceder

Carole Valentine

>Yeah...I am not the best at sharpening carving gouges...especially the little guys. The video from Cape Forge helped. At least I can hone them now. But when I use burrs, sanding is a necessity. I have made my own mandrels for my WeCheer from cut-off nails glued into a turned wooden head. The nails fit in the rotary tool's collet. Even with all the gidgets I've made up, it's still tedious. I think Terry is right...patience is the best tool.

Re: Red Ceder

#10

carving cocobolo

John K Jordan

>Carole,

Have you ever tried carving cocobolo with a reciprocal carver? It cuts so smoothly (with a sharp gouge) that no sanding is necessary except where you want to remove gouge marks (which can often be left as texture) - the surface is smooth as glass!

JKJ

Re: Red Ceder

#11

Re: carving cocobolo

Carole Valentine

>Yes, John. I have come across several woods that will cut that cleanly with a blade. It's a shame I don't have the talent to match the wood! :(