Seeking source: carbide insert with 2" radius
Steve Harder
>I'm looking for square carbide inserts (usually 14mm square) with a 2" radius (50MM). I'd also love to find round 15mm or so inserts.
Knowledge You Can Build On — Est. 1998
Seeking source: carbide insert with 2" radius
Steve Harder
>I'm looking for square carbide inserts (usually 14mm square) with a 2" radius (50MM). I'd also love to find round 15mm or so inserts.
Re: Seeking source: carbide insert with 2" radius *LINK*
Steve Kubien
>Funny, I just learned about this source about 30 minutes ago...
carbide inserts
Re: Seeking source: carbide insert with 2" radius *LINK*
Jerry Hall
>See link for 4" radius. Maybe you can find 2" radius there too.
"For "Byrd" Shelix � Journal Heads
15mm x 15mm x 2.5mm - 4-edge - Radius Faces
100mm face radius - 15mm x 15mm x 2.5mm. Fits "Byrd" Shelix � Heads - Byrd Ref. P/N 1791212 (Priced per box, 10 knives per box.)
I got these for my easy rougher. Work great at about $2 each plus shipping in box of 10
http://globaltooling.bizhosting.com/products/carbide-insert-knives.html
Re: Seeking source: carbide insert with 2" radius
Steve Harder
>Thanks - those are what I'm looking for, and at a good price.
Might be source of round inserts
Steve Harder
>Woodchuck would say they may have round carbide inserts for sale - will know in a couple of weeks ...
Re: Seeking source: carbide insert with 2" radius
don lewonczyk
>Jerry I ordered a box from Global that you recommended. The question I have is the screw hole the same size as on the orginal easy rougher? Anyway thanks for the information and if you find anything for the number 3 hunter tool with the round carbide cutter please let me know by posting. Thanks again, DonL
Re: Seeking source: carbide insert with 2" radius
Jerry Hall
Don, Screw hole size worked fine for me. I am using the original ER screw. Wished I had ordered some spares. It is only a matter of time before I spend a morning grubbing around in my shavings with a magnet. Jerry