Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

What are you thinking?

Posts

What are you thinking?

#1

What are you thinking?

Paul Zerjay

>My wife says I'm weird every day. I know I've smelled a few lacquer fumes, but I don't think I'm that much different from any of you. My mind is constantly thinking of something totally different from what it should be thinking while I'm doing mundane turning operations like rough hollowing for instance. Once I get close to the wall thickness I want, I come back from dreamland, but until then I'm off to the races. I'm tiring of the usual "this is gonna be my best turning yet" dream. I often wonder what Ellsworth would want in a full time partner. Sometimes I have my own T.V. show (Norm is retiring you know, although I wouldn't say he was much of a turner). The president of the local turning club called me up the other day and said there was a 10 city demo circuit opening up and asked if I wanted to do it. Sometimes the phone rings and it's the del Mano gallery on the other end. These are just a few of my favorites. Does your mind wander?

Re: What are you thinking?

#2

Ellis Walentine

Don't get me started 

Ellis Walentine

>The "zone" is what I call it, when you are tuned in to the point where your conscious mind gives way to your instincts and your unconscious. I've found that it takes a while to get to that point, but when you do, it's all about the process itself and your experience of it. Thoughts like yours, and revelations, come flooding in without provocation or judgment. Some people never attain this level of connectedness; others do but don't articulate it. All I can say is go with the flow. You may be quite amazed at what you can do. Post pictures. :)

Ellis

Re: What are you thinking?

#3

Steven Antonucci

You are in deep when you sketch in bed at 3am

Steven Antonucci

>because you had a dream about a turning you needed to make. If I didn't have a real job, I would probably get up, put on coffee, and go out to the shop to make it (hasn't happened yet).

When you can actually explain something to someone that turns and they DON't understand you, you're past the point of no return...

S

Re: What are you thinking?

#4

You're not alone Paul.

Molly Winton

>I do exactly what you're describing. At night I watch too many forensic and whodunit shows, so when I'm 'in the zone' as Ellis describes I make up stories about the neighbors or general comings and goings in my neighborhood. I live in a cul-de-sac. One neighbor I don't know much about. He's German and she's Russian. There are a few cars that come and go during the day, so I've had many spy and/or Russian mafia scenarios.

I've also gone through my own murder or abduction a few times too. I imagine what types of forensic evidence I would leave, not only at the crime scene, but in the abductor's car, or what the murder would carry away with him, (camphor chips embedded in his shoes, maple dust on his pant legs, sandpaper grit in the carpeting of his trunk) etc.

Weird, you bet...but entertaining too. Just like you though, when I get to a critical design point, or tricky cut, I'm flash back to full turning attention.

Re: What are you thinking?

#5

Re: What are you thinking?

john lucas

>Paul At 2:30 this morning I thought of a design for a piece that I've been puzzling over for a year. The other day at lunch I had to borrow a napkin from a friend to make a sketch on. Wish I could remember what I was eating at the time. Must have been brain food.

Re: What are you thinking?

#6

I Guess I Am Different

Barbara Gill

>I mostly think about what I am doing and how I can do it better.

Re: What are you thinking?

#7

Be Careful Molly!

Thomas Skaggs, Foothills of Mount Level

>Unbeknownst to you I work for a secret government agency. We have had an eye on your neighbors for over a year. "The Russian" and "The German" as we call them are foreign agents here in America to steal the secrets of some of our best craftsmen. I recommend you check your shop for bugs/cameras. Now, go back to turning and pretend everything is alright. We'll contact you later....when we are ready to make our move. Mums the word!

T.

Re: What are you thinking?

#8

Re: I Guess I Am Different

Stuart Johnson

>I'm normally in a discussion mode. will I get a catch if I do this? - yep, what if I do this-yep?, this? - yep..... okay this works great, now I'm turning - dang :(

Re: What are you thinking?

#9

Re: I Guess I Am Different

Scott in Falcon

>I am different too. I have yet to achieve that Zen like state while turning. In fact, I am usually thinking things like, "Careful... You don't want to turn through the bottom of this bowl..." And then I promptly proceed to do just that! In fact, I did it twice this weekend!

At least I can say that I am consistent!

Scott

Re: What are you thinking?

#10

Re: What are you thinking?

Don Orr

>I often have a hard time getting to sleep at night because my mind is racing 100mph around 100 different things. Not all good, not all bad. Mostly just day-to-day stuff. Once in a while I actually get a turning idea.

I have to pay attention to what I am doing when I turn or I can get into trouble.

Re: What are you thinking?

#11

Brad Vietje

Demonstrating or Teaching

Brad Vietje

>I'm usually in the "Teaching Zone", and imagine myself demonstrating what I'm doing at the next regional symposium, or giving a talk to kids, etc... Of course, when I screw something up, there are all those people watching! My wife has come out to the barn to ask me who I'm talking to ???

As for the phone ringing, I just want the call from Ed McMahon telling me I WON! Two slight problems with scenario: 1. I never enter, and 2. he's dead :|

Safe spinning,

Brad Vietje

Newbury, VT

Re: What are you thinking?

#12

Re: Demonstrating or Teaching

Don at Central Illinois

>I hadn't really thought about what my mind goes through while turning. I don't think much. My job is stressful enought, one of the reasons I took up turning. I HAVE to pay attention to what I'm doing. I don't have time to think of the job, a new design, etc. Maybe that is a Zen zone, mind blank just paying attention to the moment.

Re: What are you thinking?

#13

I KNEW it! I'll be ever vigilant!!

Molly Winton

Re: What are you thinking?

#14

Re: I Guess I Am Different

Doc Green

>One track mind. No music. No distractions. Stay focused. Avoid complacency.

And, an ever present question: "What's this thing going to do to try to kill me?"

~Doc

Re: What are you thinking?

#15

Re: I Guess I Am Different

Mac Ray

>I am still waiting to hear the wood "talk to me" when I turn....it had better hurry up.....

Re: What are you thinking?

#16

Same Here Barbara

Texian

>And also "Am I overlooking anything which may result in damage to self or the work?"

Re: What are you thinking?

#17

Re: I Guess I Am Different

Barbara Gill

>LOL Mac. You mean the wood hasn't "told" you what it "wants" to be?

Re: What are you thinking?

#18

George Taylor

Re: What are you thinking?

George Taylor

>Mine is simple ... "dreaming of RETIREMENT!"

sigh :(

George

Re: What are you thinking?

#19

Re: What are you thinking?

Barry L Elder

>When I'm at the lathe, there is usually just one continuous thought --- Wow!

To be able to uncover all the incredible pictures and history of each piece of wood that I'm lucky enough to turn. I have truly been Blessed! I know that not everyone can see what I see as I work with each chunk, but then we all have different expectations from life. Each day, each blank is a new adventure!

Re: What are you thinking?

#20

Keith Tompkins

Re: What are you thinking?

Keith Tompkins

>Hey Paul...write those ideas down, then see how many come to fruition. You will be amazed what you can accomplish when you turn those daydreams into goals, and then persue them. Del Mano?! Think big, my friend, think big. I get ideas at all hours of the night, so I write them down in my scrapbook..I try to turn the very best ones. I think it was Ruth Niles commenting on my work...You can't turn an ordinary object, can you? I liked that. :)