Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

I dug this up...

Posts

I dug this up...

#1

I dug this up...

Bill Neddow

>The idea was to make this look like it had just been dug up at some archaeological site. I got the idea after seeing an exhibit at our museum called "The Lost City of Petra". There were no ceramic bowls in the display -- just some broken pieces of rock off the fronts of buildings. There were symbols on some of them and the proverbial "idea" light bulb came on. I tried copying them with a dremel tool when I got home, but the tool followed the greain of the wood. I was getting frustrated, until I realized it did not matter anyway, since I don't speak the language. So, my alphabet has grown from six to about 20 symbols, mostly through error. It is symbolic only -- not meant to be read. The bowl is Big Leaf Maple burl, 18 inches wide by 4.5 inches deep. Lettering is cut with a dremel and filled with Clay Foster's mix of tile grout and Artist's modeling paste. The background is 23K gold leaf.


Re: I dug this up...

#2

Re: I dug this up...

Grant Wilkinson

>Beautiful piece, Bill. I'd like to see another pic, with it standing up a bit, so that I can see the work on the rim better.

Re: I dug this up...

#3

Re: I dug this up...

fgvanatta

>Beautiful, innovative piece. I second the suggestion to show a pic of the top.

Re: I dug this up...

#4

I sure dig what you dug up!

Mike Jones in Redding, Ca

Re: I dug this up...

#5

Re: I dug this up...

Mike Rubes, Apex, NC

>Hi Bill,

I like this a lot. Add me to the list of those who would like to see a top view picture. Also, what did you do around the inscriptions to lighten the wood? I like that affect.

Thanks for the picture.

Mike

Watching the snow melt in Apex, NC!

Re: I dug this up...

#6

Barb Siddiqui

Very very Nice!

Barb Siddiqui

Re: I dug this up...

#7

Steve Kubien

Re: I dug this up...

Steve Kubien

>I love your Petra series and this piece is no exception. Very, very well done.

Re: I dug this up...

#8

Re: I dug this up...

Bill Neddow

>Well duh! Dumb me. I have been trying to get an all-in-one shot showing the top and the form (part of the side). It just was not working and I had given up. Of course, a top shot!


Re: I dug this up...

#9

Re: I dug this up...

Bill Neddow

>Mike, the background around the inscription is 23k gold leaf, now under several layers of Salad Bowl Finish. The inscription lines were filled with Clay Foster's mix of ordinary sand tile grout mixed with artist's modeling paste (to make it flexible so it will move with the wood). I think Clay may have stopped using the modeling paste as he found it was not necessary -- but I am scared to try that yet.

Re: I dug this up...

#10

Steven Antonucci

I like this a lot

Steven Antonucci

>Good look, well executed... two thumbs way up!

Re: I dug this up...

#11

Re: I dug this up...

Bill Grumbine (Kutztown PA)

>I don't know Bill... It looks like you runed the top with those letters. :b Seriously, very nice work, as usual.

Re: I dug this up...

#12

Re: I dug this up...

fgvanatta

>Pretty good for a "made up" alphabet. I can almost make out what it says . . .

Frank

Re: I dug this up...

#13

Re: I dug this up...

Bill Neddow

>Frank, it is based on Nabatean, the language of the ancient city of Petra. The language is a predecessor of both modern Arabic and Hebrew. But, with the spelling mistakes caused by the Dremel following the grain, it really is quite different. Since my use is only for symbolic purposes, I have not hesitated to throw in a couple of Nordic and Celtic runes. You realize it is some language, because it is based on symbols used in later language -- including Greek.

Re: I dug this up...

#14

Yikes...

John K Jordan

>... for a moment there I was afraid it was another cypher challenge! :)

Very nice piece, Bill! Beautiful wood too.

JKJ

Re: I dug this up...

#15

Re: I dug this up...

Ralph E Watts

>Bill,

Exceptionally well done. However, I speak this ancient language (with a slight southern accent) and the inscription translates to: "I'm going to bury this chewed up bowl since I can't sell it". Best regards, Ralph

Re: I dug this up...

#16

Steve Kubien

Order of operations...

Steve Kubien

>So, you do the gold then the grout/paste mixture and wipe off the excess just as if you were grouting a tile wall? Does anything go over the gold to keep it down while you grout?

Re: I dug this up...

#17

Re: I dug this up...

John Lucas

>Excellent job Bill. I'm pretty sure if you decipher what the lip reads you will open up a time warp of some kind and get to visit another dimension. They probably have woodturners there also.

Re: I dug this up...

#18

Re: I dug this up...

Bill Neddow

>Ralph, that is exactly what I wanted!

Re: I dug this up...

#19

Re: Order of operations...

Bill Neddow

>Steve, I have learned that there has to be a specific order to the steps involved.

1. Cut lines for the edge of the band on the lathe.

2. Sand and then finish the bowl keeping the finish out of the grooves for the band, and off the band. (This allows you to use either oil or water-based size (glue) for the gold -- I use oil. If you use water size, you do not want any oil finish on the band area. If you use oil, you do not want any finish in the grooves, which have to be filled with water-based grout.)

3. Cover the whole band with your chosen size and lay down the gold. It does not have to be a perfect job, as it looks more ancient if it is "distressed".

4. Coat the gold with at least three coats of finish, which keeps the grout from scratching and even obliterating the gold leaf). Let sit for a few days to harden.

5. Cut the lettering in with either a Dremel tool or a dental drill. The dental drill works better, but still follows the grain a bit.

6. Mix grout and artist's modeling paste about half and half. (The sand grout comes in various colors. I use Almond.) Rub into the lettering and rings and wipe off the excess with water.

7. Let set overnight, then coat everything with another coat of finish. I use Behelens Salad Bowl Finish, but any other good finish would work.

Re: I dug this up...

#20

I can read that,,,,,,

Barry Irby

>It's a runic rhyme. It translates to There was a young lady from Nantucket....

I had the rest of it but the new screen for bad words would not let me post it. I tried three times. Gotta hate Censorship.

Great bowl. Congratulations on leaving the the notches out the edge. I would have had to make it smaller to eliminate it. I would have been wrong.

Re: I dug this up...

#21

Re: I dug this up...BEAUTIFUL!

Ruth Niles

>Bill, you did a great job on this piece. It does look like an ancient piece......just cleaner. : )

Re: I dug this up...

#22

Steve Kubien

Re: Order of operations...

Steve Kubien

>Thanks Bill. I've got an idea for which this process may work nicely. Cheers,

Steve

Re: I dug this up...

#23

Re: Order of operations...

Bill Neddow

>Good, Steve. This is how great new work happens -- somebody is inspired with something and takes it in a new direction. Let us see what you come up with.

Re: I dug this up...

#24

Re: I dug this up...

Grant Wilkinson

>Pretty bad, Bill. (Grumbine) Pretty bad. :-)

Re: I dug this up...

#25

Outstanding Bill !

Don Orr

>Very nice work as always.

I think the symbols are the secret directions to where you dug this up ! ;)