Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Sad to see our tree go

Posts

Re: Sad to see our tree go

#26

Re: A day and a half's work

donincentralwashington

>509 929 0246

don270@gmail.com

em or call either works!

Re: Sad to see our tree go

#27

Barb Siddiqui

Re: Sad to see our tree go

Barb Siddiqui

>Oh! I thought you were in TriCities..I e-mailed you, and will give you directions. If you come Tuesday, it will have to be in the afternoon; I'm busy until 12:30 or so. Glad to meet you. -Barb

Re: Sad to see our tree go

#28

Rob Wallace

Gettem off the saw!!  I once....

Rob Wallace

>...made the mistake of placing a couple freshly cut blanks on my table saw (even though they were covered with "dried" Anchorseal) and after only two days the surface of the saw had developed an even coat of rusty areas under each blank as though it were a 'rust shadow' in the exact image of the blank. Fortunately I caught it in time, and was able to buff-out the rust and seal the saw's cast iron top, but I should have known better! I've had no problems placing freshly prepared "wet" blanks on the shop floor (concrete), except for the occasional fungus growth where a blank was sitting in contact with the floor, even only after a few days of waiting for me to get to the blank to rough it out.

The severity of rust generation probably would not be as bad with your silver maple as it would be with cherry or walnut, but it can quickly rust an iron tabletop none-the-less. Just keep an eye on what you do with your tools (lathe ways too!); whether deliberately or not, you can ask for quick rust generation in a seemingly harmless situation...been there, done that!

Rob Wallace

Re: Sad to see our tree go

#29

Barb Siddiqui

Re: Gettem off the saw!!  I once....

Barb Siddiqui

>Well Rob, I'm ahead of you on that one. Long ago, after coming home from work and finding a car's alternator taken apart and laid greasy all over my tablesaw top, the second thing I did, after turning purple and yelling, was to build a slide-on cover of OSB trimmed in grooved molding that protects it as a work surface. This maple is Wet and I laid newsprint over the cover, set out stickers from previous stackings, and put the wet, end-painted pieces up on those. So never fear; I've avoided disaster on that front, at least!

Re: Sad to see our tree go

#30

Barb Siddiqui

A few days of Give-Aways

Barb Siddiqui

>Well, the pile on the lawn is somewhat reduced, as two local woodworkers came by for a carload and drove away Heavier than they arrived. Then yesterday Don Lennon (DonincentralWA) drove 70 miles with a trailer to pick out sixteen hefty logs for his signature natural edged bowls. It's fun to meet others with the same affection for this tree and the wood. Yesterday and today I'm knocking together another drying rack for the garage, because I've run out of room and have so many more stumps to process. I'm beginning to get antsy to actually turn something with it, and may take a day to let some green curls fly before chainsawing more. I'm surprised it hasn't split and cracked yet, sitting on the lawn for two weeks, but our humidity levels have been 80-90% lately, so maybe that has something to do with it. The sun is out now through the weekend, and I have to work my regular job Thurs thru Saturday night, so I'm anxious to get a few more processed and sealed before that. Depending on Ibuprofin, Icy Hot patches and no interruptions!

Re: Sad to see our tree go

#31

Barb Siddiqui

Hey, how come

Barb Siddiqui

>you can build a new shelf to store processed wood blanks on, and it fills up before you even cut any more wood blanks? That doesn't seem very fair.


Re: Sad to see our tree go

#32

Don in central washington

Re: Hey, how come

Don in central washington

>Just get another shed! have two and yard still gets its share.

FYI have fourteen conv. bowls roughed out will bag and spalt them for awhile

from that which we picked up yesterday. Had to get back to staining some more bland maple that was dry.

tks again.

Betty andDon

Re: Sad to see our tree go

#33

Barb Siddiqui

You were fast

Barb Siddiqui

>to get so many bowls roughed out! It was great to meet you Don, and thanks for the Wenge and Yew and bits of birdseye maple you traded me. I'm really looking forward to getting some of this stuff on the lathe, but first the yard needs to be cleaned up!