Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Wet weather tatics

Posts

Wet weather tatics

#1

Wet weather tatics

mjonesrdg

>Here in far Northern Californa, our draught has finally broken. Pacific storms, one after the other, have kept the humidity very high in my unheated shop.

In order to keep my creative flow, I have added a bit of Japan dryer to my homemade tung oil finish, and I let them dry in a 120 quart ice chest with a 40 watt bulb burning.

I also dig through my "dry bin" and turn small boxes etc.. They are from left to right, poplar, maple burl, silver maple, maple burl, and Mexican ironwood in the center. A few rough turned bowls have not lost any weight now for a week, but I know they are still too green to turn, my moisture meter reading "off the scale".

The cherry goblet was turned green...my challenge to turn really thin, this one is the only one of three that made it to the finish. It's translucent and is .o6o" thick.


Re: Wet weather tatics

#2

tactics!

mjonesrdg

Re: Wet weather tatics

#3

Re: Wet weather tatics

fgvanatta

>I like the goblet best of all; especially the stem.