I'm in search of a comfy chair to sit at my bench and work from. Clay and I are in the final completion stage of a shop renovation and the old chair got tossed. For those of you who sit for long periods of time carving, burning etc. , what type of chair do you use. I'd like one with a back and I'd also like something adjustable in height so I can change positioning more. I know some people who burn and do this stuff that takes hours have a dedicated lazy boy chair, or even an old dentist chair, but I'd like to be at my bench where all my stuff is and not sit in another place to do this type of work. I'd appreciate any responses and I'd love to see pictures if you have them to give me ideas. Here is the space where I work and do my wood doodling.
I have a highly adjustable and fairly comfortable computer/office chair. It's also on wheels so I can roll along the length of the bench or spin around to the tablesaw extension (which is my other "bench"). Problem is mine is fabric and hangs onto dust and chips...next one will be something smooth like fake leather. Only problem I have with it is it does not go up high enough to be comfortable when a piece is mounted in the carving vise...I have to sit on a stool then.
>....configurations, but for some reason most of the newer styles have arm rests, and that would always be an intrusion while working. There might be some candidates at Goodwill or other used stuff stores, always a good place to find other goodies like lamps, etc. How is the heat situation working out in the new shop, and it looks a lot better than the last time I saw it?
>Jen, I really like the new cabinets and workbench/drawers. That looks spectacular! And I hope that the rest of the shop looks equally good.
As to a chair, I would recommend something to support the small of your back and provide comfort when you get tired and must lean back for a short break. Maybe a good desk chair and you cut off the arms. I once got a good office chair from a used office supply place.
U used to have a computer chair on wheels, but my shop floor is not really flat so got little use. Now I have the back seat of my old van and the rare occasions when I need to sit at the shop, I plop in there.
>the kind with aluminum tubes and fabric. I bring the hoses/tools/etc to the seat, and I never work at a bench since it is too high to be comfortable for long periods of time.
I have been found asleep in that chair once or twice. $10 give or take...
>Great looking work area!! On to the chair question. Grizzly just started shipping to Canada and I wanted to see how the process worked. I didn't really need anything so I decided to order their 'Deluxe Shop Stool". Didn't hurt that it reminded me of the seat on my first Harley . Anyways......this is the most comfortable shop stool I've ever sat on!! Give it a look.
>I use an old boat chair but if I had to buy one I would buy an office chair. Both of mine are adjustable and lean back if I want. They give good back support.
I've been eyeing this stool from Harbor Freight, but just checked their catalog for specs and couldn't find it (though individual stores may still have them). I think it adjusts from 23" to 28" - just don't know how that fits for your height and the counter height. Looked pretty comfy in the store.
>I was given a old hairdressers chair it tilts rotates and can move up and down.. its very nice. there is also a old draftmans stool that works the same way. I sometimes turn sitting down
>Brent that looks comfy! Harbor Frieght has one that looks similar but the legs look very cheepo compared to the pictures in this one. I may save my pennies for this one. Thanks for the link.
>Sure looks a wee bit different than it did a couple years ago kiddo,hope that 'ol ash tree doesn't decide to fall on the roof.............really nice,congratulations........
>Jen, try to find an old switch board chair. They have a good back support and can be adjusted up or down to fit what ever you are doing. I have one and love it.
>Steve are you talking one of those low to the ground chairs? It sounds like a good idea for summer time wood doodeling, but not on concrete in winter. Even with heat! I may check that out later in the year though. It might be a nice change to drag my stuff outside.
>Yup, Jamie, I cruised Goodwill. The last chair I used came from there but it's too high now. My computer chair in the house is too low. I'll find something. Still need to scour eBay. I may have to fork over some dough for a really good, comfy chair. The heat is on here at the shop! I can't tell you how wonderful it is not to be breathing kerosene fumes. It's still strange to walk out there in the morning and have the temp of the shop be 62 degrees, when it's 17 outside. Heaven I say!
>Having experienced the fun and games of herniating a disc - a month in traction and another two flat on my back except for three 15 periods each day - all thanks to sitting in a crappy desk chair for 6 or 8 hours at a time - 6 days a week - for four or five months - I learned about two words - ergonomic chair - and about NIOSH
(think it stands for National Institute Occupational Safety and Health (the scientific/engineering/research and evaluation group - as opposed to OSHA - the enforcment group..
Key features of an ergonomic desk chair
- shock absorbing seat support column (plonking down in a
seat, with or without padding ain't good for your spine
- seat height adjustable so your feet can rest flat on the floor
if the seat height required won't allow that, then foot rests
- adjustable height arm rests - so you can periodically put your
body weight on them - instead of on your spine
- seat should be able to tilt - to put that needed curve
in your lower back
- adjustable backrest - adjustable up/down and foreward/
backward - with built in lumbar support padding - or inflatable
lumbar support.
A bar stool is probably one of the worst things to sit on
for any lenght of time - sober. Metal folding chairs are
right behind bar stools. And metal shop stools aren't far
behind.
I know that when you really get into something and
things are going well - it's easy to stay at it longer
than you should. So set your watch to remind you
at the end of each hour - to get up and walk around
and maybe stretch a bit. Trust me, there's not
much you can do that's productive when you're layed
out flat on your back - for weeks or months.
Wasn't obvious to me, but sitting is FIVE times worse