Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Basket work - OCD turners

Posts

Basket work - OCD turners

#1

Basket work - OCD turners

Dave Belser

>

This is the result of turning that stack of maple veneer I posted the other night. The size is about 3 1/2" x 5 1/4". This one has 5 ribs/spacers that are parallel across the form, alternating 2 / 3 on each layer. This causes the veneer to undulate up and down.

Re: Basket work - OCD turners

#2

Another shot

Dave Belser

>

Another shot showing more of the top. You can also see the spalt line running down through the side of the hollow form.

Re: Basket work - OCD turners

#3

The full set

Dave Belser

>

All of my work in this direction to date.

Enjoy

- Dave

Re: Basket work - OCD turners

#4

Omigosh! Fabulous!

adrien

Re: Basket work - OCD turners

#5

Re: The full set

Cyril Griesbach

>I wondered how that would turn out, Dave, and the answer is that it turned out wonderfully.

Re: Basket work - OCD turners

#6

Re: Basket work - OCD turners

Don Evans

>I cannot tell by looking at the picture, so am I right or wrong on this:

The top and bottom are turned on lathe and the side strips are cut and glued into slots in the ribs?

Regardless how it's done they look very good. Were you ever into weaving?

Don

Re: Basket work - OCD turners

#7

Re: Basket work - OCD turners

Paul Zerjay

>So how do ya chuck up a stack of glued up veneer like that?

Re: Basket work - OCD turners

#8

Brad Vietje

WAAAAAY Cool, Dave!

Brad Vietje

Re: Basket work - OCD turners

#9

Rob Wallace

Very creative - really cool concept Dave!

Rob Wallace

>Beautiful pieces - eye catching, and they will definitely make people think....

Rob

Re: Basket work - OCD turners

#10

Re: The full set

Fred Bearman (Port Huron, Michigan)

>I was just showing these to my wife, and like I told her - an absolutely excellent piece of work! Like them a lot. :)

Re: Basket work - OCD turners

#11

Re: Basket work - OCD turners

Dave Belser

>Don it is an assembled stack. No notching involved. The layers of veneer are stacked with the sticks and then I steam and compress the whole mess, the result being a cylindrical assembly. Once that is done I turn the vessel form.

Re: Basket work - OCD turners

#12

Re: Basket work - OCD turners

Dave Belser

>Paul, this is some of the work I've been doing while exploring "supported" turning. I build up structures and then use wax or ice to support them while turning, melting away the support when finished.

Re: Basket work - OCD turners

#13

Re: Basket work - OCD turners

Brent Smith in Montreal

>Dave that's amazing work, and for a new turner like myself looks almost impossible. How do you turn it?? I mean how do you attach it to the lathe and how do you support it? Do you cut out the inside cross members before turning, or turn them out on the lathe? Basically, how do you do it????

Re: Basket work - OCD turners

#14

How clever!

John K Jordan

>What a great idea and great turnings! When I saw your stacks earlier I wondered what crazy thing was going on! Talk about unique.

I've imagined ways to support things while turning but only thought of things like plaster - I never thought of using wax! But I don't know how you would use ice without a pretty cold shop!

Thanks so much for showing this. (And I'm sure others like me would love to see more photos of the preperation and of the turning in progress.)

JKJ

Re: Basket work - OCD turners

#15

Yes Sir!

Jorge Casta�eda

>Dave,

You are up to something good, I like it.

What OCD stands for?

Thanks

Jorge

Re: Basket work - OCD turners

#16

Re: Basket work - OCD turners

Paul Zerjay

>I agree that's a very clever idea. The ice seems like a better route to go...that's a lot of wax!!!

Re: Basket work - OCD turners

#17

Re: Basket work - OCD turners

bowlman

>David,

Another round of applause! You have created a new path where none existed. I hope you continue along this path and, please, take us along for the ride. Looks great! Now, you need to write an article for American Woodturner!

Re: Basket work - OCD turners

#18

Outstanding !

Don Orr

>Now that is really thinking outside the box, outside the bowl, outside the vase, outside the norm. Your mind works a little different than a lot of people doesn't it ! (I mean that in a very good way!)

Looking forward to where this takes you.

Re: Basket work - OCD turners

#19

Re: Yes Sir!

Dave Belser

>Thanks Jorge.

OCD stands for "Obsessive Compulsive Disorder", like a number of clinical disorder terms - I think it is overused and often mis-applied. I've read that 6 out of 10 people exhibit OCD traits.

For me, the Obsessive (and possibly Compulsive) seem to apply to a lot of my work. I've always been drawn to highly repetitive patterns and structure (tiles, branching etc). I tend to make work that involves "pushing" or repeating some aspect to what some people would consider monotonously boring levels. I've been trying a lot of different layered structures and it evolved into the ones presented here, which are not much like I imaged and set out to create. I'll keep trying to create that original, imagined idea - the "problem" is that along the way I find other ideas. Some would consider this obsessive :)

Compulsive - I don't think that there is a lot of "compulsive" it what I do - I don't *have* to do it. But it pleases me and becomes almost meditative when I'm doing it. The closest it comes to being compulsive is that if you put a small pile of identical or similar things (toothpicks, stones, paperclips, seeds) in front of me I will probably start arranging them and playing with them without thinking about it.

True OCD is when it interferes with a daily *normal* life - you can't leave your house if you came down the stairs and "forgot" to tap every third spindle. To the point that you will go back and do it again until you get it right.

There is a great exhibit at the "American Visionary Art Museum" in Baltimore that is titled "Obsessive Compulsive Delight" check it out if you get a chance.

Re: Basket work - OCD turners

#20

Re: Basket work - OCD turners

Don at Central Illinois

>I wondered when I saw the original post, what it was going to be. This is wonderfull. I'm glad other people's minds work in way's mine don't.

Re: Basket work - OCD turners

#21

FANTASTIC!

robert davis

Re: Basket work - OCD turners

#22

Re: Yes Sir!

Jorge Casta�eda

>Dave,

I don't think creativity is compulsion, my Mother used to say: The fool that persists in his foolishness becomes wise" , so whatever is trying to come out, let it flow...

Looking forward to more.

Thanks

Jorge

I'll visit the museum later, I could not get in, way too slow...

Re: Basket work - OCD turners

#23

Re: Yes Sir!

John Jordan

>Great. It will be interesting to see where you go with this. That may be my favorite museum in the world. I haven't been in a while. Probably not too crowded today. :)

John

Re: Basket work - OCD turners

#24

Wonderful

Mike Foster

>I couldn't really picture the result of your stack when you posted it earlier. The result is wonderful. I understand the need for steam bending, and can visualize how it was done, but how in the world did you do the glue-up before the glue starts curing or the wood loses it's flexibility? Seems like it would take a lot more time to get the glue where it tacks the bent wafers together. I haven't ever tried steam bending, but seems like the wood would not remain pliable for long.

Great idea and execution.

Mike