Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Finish for pepper mill and salt shaker

Posts

Finish for pepper mill and salt shaker

#1

Finish for pepper mill and salt shaker

Jeff

>I am making a pepper mill and salt shaker for my brother and need some ideas on a finish. I have used a friction finish in the past but he is not too fond of it. I thought of using lacquer but then realized that it would be exposed to water and cooking oil. Right now I'm thinking of using poly but thought I would get some other opinions first. They will be made of cherry.

Thanks,

Jeff

Re: Finish for pepper mill and salt shaker

#2

Steve Kubien

Re: Finish for pepper mill and salt shaker

Steve Kubien

>I have used rattle-can lacquer with no complaints from clients. In fact, my Sensei has the first set I ever sold and he is a fanatical cook who uses them regularly. They still look good as new (over a year of hard use later).

Re: Finish for pepper mill and salt shaker

#3

Re: Finish for pepper mill and salt shaker

Peter Lamb in SC

>I use Minwax wipeon poly 4-6 coats with good results. It comes in high gloss and satin. I find it a forgiving finish. Then buff and wax

Peter

Re: Finish for pepper mill and salt shaker

#4

Re: Finish for pepper mill and salt shaker

Tom Vensel

>For this set that I made for ourselves I brushed on two coats of satin polyurathane and then used the beale buff system to smoothe out the brushmarks . They will get hard use and I wanted a finish that would take soap and water . Tom Vensel in snowey S/E Ohio

Re: Finish for pepper mill and salt shaker

#5

Re: Finish for pepper mill and salt shaker

Doug Turner

>A demonstrator at our club who specializes in (and sells) peppermills uses several coats of Waterlox which contains a varnish. After the desired sheen is obtained he gives it a Beal buff without the wax. Water will spot wax and/or lacquer.