(Message Deleted by Poster)
Rob Wallace
Knowledge You Can Build On — Est. 1998
(Message Deleted by Poster)
Rob Wallace
Link is to a Different Story
Ric Taylor
>The link goes to a story about a lady skiing.
Re: Link is to a Different Story
Don at Central Illinois
>Doing some of those flips and going a zillions mph down a hill on snow. Now that's a death wish.
scary-no face shield or even safety glasses *LINK*
John Lucas
http://www.youtube.com/watch?v=XsCFze4zkzk&feature=related
Re: Woodturning on NBC - Today Show
E Tabachek
>No woodturning. Only Olympic stuff and some guy turning a big aluminum disc ?????
ET
Trying Link Again! *LINK*
Rob Wallace
>I hope the link works correctly this time....
Woodturning on NBC Today Show - 8 Feb 2010
Rob Wallace
>Did anyone else see the teenager roughing a bowl blank on NBC's "Today Show" earlier today? He was a kid from Wichita, Kansas who had survived one of the latest teen crazes of choking one's self (or someone else) until they pass-out for the apparent "rush" they get once choking is stopped. Some of these 'fun times' end in death..... 
The kid they interviewed was brought back from death after he had been found blue and cold by his mother. This kid was turning a bowl blank on a Jet mini-lathe, using a spindle roughing gouge (!) and without a face shield either! - Perhaps he needs some turning instruction (duh!) or he really does have a death-wish? No mention was made about the turning process shown, so those viewers who have never seen it would have no idea of what he was doing.
See the video clip at the link in my other reply in this thread....
Rob Wallace
Re: Woodturning on NBC Today Show - 8 Feb 2010
Don Evans
>I don't understand the fact that no one seems to know about this. This is nothing new I remember back in the 60's they were doing it in school then! It is really a dangerous thing to try of course. I never did it as it didn't take a genius to figure out it was dangerous act and that floors me more than anything with comments made about it today, "didn't know it was dangerous" duh....
Regarding the faceshield, in first one the guy was spinning metal which doesn't use a cutting action but instead a rubbing action with lubrication on the metal. You don't have shavings coming off in all direction. Also the mass and speed that was being used was at production shop not in USA and doubt a shield would do much good if anything when wrong.
The kid turning may have a shield but I can hear a news producer in background saying "cann't you remove that for this shot so we can see your face", they want the person identifiable for legal reasons... been there done that!
None of what I said makes it right however.
Don
Re: scary-no face shield or even safety glasses
Don at Central Illinois
>Yes, but if that thing blows, a face shield isnt' going to help.