Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Laser Depth Finder for Oneway Coring Rig

Posts

Laser Depth Finder for Oneway Coring Rig

#1

Laser Depth Finder for Oneway Coring Rig

Mike Brazeau

>On New Year's Day I put together a laser depth finder to correctly position the Oneway Coring Rig so the bottoms of roughout bowls are consistant with walls. Finally got to using it on the weekend and it worked as I had hoped it would. I have put together a photo turial in ppt and can send a pdf of it to anyone who wants it. Drop me an email - note the correction in email address needed.

Re: Laser Depth Finder for Oneway Coring Rig

#2

Re: Laser Depth Finder for Oneway Coring Rig

robo hippy

>I am curious as to why you would need a laser pointer on the Oneway coring system. I just made plywood templates to position the tool rest the proper distance away from the headstock so that bottoms would be 1/2 inch thick. Position the tool rest, with your chuck in place, so that the swing comes within 1/2 inch of the chuck, and make a piece of plywood that length. 4 blades, 4 pieces of plywood.

robo hippy

Re: Laser Depth Finder for Oneway Coring Rig

#3

Re: Laser Depth Finder for Oneway Coring Rig

Mike Brazeau

>I never liked that method that Oneway had on the video. Do not do production work and with a lot of variety of blanks found I was measuring and guestimating with mixed results some times. Others have commented similar comments on other sites. With some planning a bunch of boards could be made for different thicknesses for each knife I guess, but then I would have to remember where I put them.

Re: Laser Depth Finder for Oneway Coring Rig

#4

Re: Laser Depth Finder for Oneway Coring Rig

Dick Strauss

>Mike,

Your laser system looks great!

Reed,

Since the 9" knife is used for bowls smaller than 9" you either have to make a template for 7" and 5" bowls or use a laser to cover all three.

Re: Laser Depth Finder for Oneway Coring Rig

#5

Re: Where's your e-mail listed?

Dinyar Chavda

>It's probably staring me right in the face, but where is your e-mail listed?

Re: Laser Depth Finder for Oneway Coring Rig

#6

Re: Where's your e-mail listed?

John K Jordan

>Dinyar, based on other messages here since the forum upgrade, if you don't see the email address next to his name you may need to delete your WC cookies and log back in, perhaps recreating a profile. I don't remember the details but they are in several messages a few weeks ago. Since the search is difficult to use, you might need to send admin an email if you can't get it to work. JKJ

Re: Laser Depth Finder for Oneway Coring Rig

#7

Re: Laser Depth Finder for Oneway Coring Rig

Cyril Griesbach

>Mike,

I've tried to send you an email twice but it keeps getting rejected as having the wrong address. I've checked spelling a half dozen times and removed "removethis" but no luck.

Can you try sending me the tutorial through my email link in the sender line here?

Cyril

Re: Laser Depth Finder for Oneway Coring Rig

#8

Re: Laser Depth Finder for Oneway Coring Rig

robo hippy

>Actually, you don't need different templates for different depth bowls. The template will place the cutter a set distance from the chuck jaws, and the only thing that matters is the size of blade you use, not the size of the bowl. 4 blades, and 4 templates.

robo hippy

Re: Laser Depth Finder for Oneway Coring Rig

#9

Of whom Are you Speaking?

Barry Irby

>Your's is listed right beside your name, so is Robo's. It's reedgray@comcast.net

Re: Laser Depth Finder for Oneway Coring Rig

#10

Re: Of whom Are you Speaking?

Dinyar Chavda

>I was talking about Mike Brazeau's e-mail so that I could send him a message to get the pdf he refers to in his message.

Despite following the instructions re getting rid of cookies and registering, my computer is not showing any of the usual information on the site like e-mails, number of views, etc.. I've sent an e-mail to WC administration asking for suggestions.

Re: Laser Depth Finder for Oneway Coring Rig

#11

Re: Of whom Are you Speaking?

John K Jordan

>BTW, they boss mentioned that at the current time, the message view count is not implemented.

Re: Laser Depth Finder for Oneway Coring Rig

#12

Brad Vietje

Dinyar -- Mike's e-mail

Brad Vietje

>is mjbrazeauremovethis@sympatico.ca

I hope you can get the new profile and preferences set up with help from the good folks at W/C.

The view counter is not up an running on the new system yet, so nobody else can see it either :)

Safe spinning,

Brad Vietje

Newbury, VT