Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Pfingst, not Pfizer

Posts

Pfingst, not Pfizer

#1

Pfingst, not Pfizer

AndiWolfe

>I just realized that I've been writing Pfizer rather than Pfingst as the brand of micro sander I use. Pfingst is the correct brand name.

Re: Pfingst, not Pfizer

#2

Re: Pfingst, not Pfizer

Carole Valentine

>Had to laugh at that Andi...Pfizer makes the ED drug! LOL (Can't type the name of it because Ellis' naughty word filter would grab my post)

Re: Pfingst, not Pfizer

#3

Re: Pfingst, not Pfizer

AndiWolfe

>Hey, Carol - thanks for that. I had no idea about the brand name connected with a particular medicine. I delete all my spam unread and without the TV set going, I miss all the adverts. Now I have to stop laughing when I pick up this micro sander each time I use it ;-)

Re: Pfingst, not Pfizer

#4

Caution! :-)

David Propst

>Don't use the sander sitting in a tub watching the sunset!

(Please forgive the stupid commercial reference.)

David

Re: Pfingst, not Pfizer

#5

Re: Caution! :-)

AndiWolfe

>I don't know the reference, but I can imagine this refers to a commercial or advertisement for the implied medical enhancement discussed in previous posts.

Re: Pfingst, not Pfizer

#6

Re: Caution! :-)

Carole Valentine

>LOL! Good one, Dave!

Nice to see you - where have you been? Are you doing any turning?

Re: Pfingst, not Pfizer

#7

Re: Caution! :-)

David Propst

>Hi Carole!

I graduated in May and started working as an NP in July. Got a great position in an urgent care. Still catching up in 3 years of lost family time and home projects and repairs. Roughed out a few bowls recently and have started checking in here. I talk with Ms Shirley periodically to keep in touch.

Good to see so many "old" names around!

David

Re: Pfingst, not Pfizer

#9

Re: Caution! :-)

Carole Valentine

>Alright! Glad you are back. Congrats on the job...you certainly deserve it after all the hard work you put in. :)

Re: Pfingst, not Pfizer

#10

Dick Hines

Re: Caution! :-)

Dick Hines

>I just don't get the bath tub and sun set thing.

Glad to see you posting again Dave.

Re: Pfingst, not Pfizer

#11

Tubs and Sunsets

David Propst

>One the the brands of medication referred to has several ads showing a couple sitting outdoors in side by side bathtubs holding hands watching the sunset. Not enough light to use a micro-sander properly and a huge electrocution risk!

Re: Pfingst, not Pfizer

#12

Re: Pfingst, not Pfizer

Barbara R Dill

>I'm so glad that is has been snowing and that I have been spending my time looking at this site. This is so entertaining. It is also great to see the questions and responses from all. I think I've worked my way all the way back to 12/09...lots to read!!

Re: Pfingst, not Pfizer

#13

Re: 12v won't even make your hair......

JamieDonaldson

>...stand up, let alone any other anatomy parts! (;-D)

Re: Pfingst, not Pfizer

#14

depends on the current

John K Jordan

>12v is easily enough to trigger muscles to contract. I learned about this in elementary school when I built a kymograph and triggered frog muscles with a variety of low-voltage sources.

JKJ

Re: Pfingst, not Pfizer

#15

Brad Vietje

Yo BABY!  You got that right!

Brad Vietje

>I have no doubt the small 12 volt system being discussed would be no problem -- 12 volts at 0.5 Amps is just 6 watts.

However, I deal with 12 volt battery banks powering inverters up to about 3kW, so if there's a momentary surge up to about 4,000 - 5,000 watts and the actual battery voltage has been drawn down to 11 volts, that's somewhere in the neighborhood of 400 Amps, which could stand up -- and then lay down(!) all your body parts!

While I would usually recommend a 48-volt system for such large loads, I have some 12-volt off-grid customers with older, inefficient well pumps (they should swap out) that work in the 300 - 400 Amp range (that's DC -- that would be 15 - 20 amps at 230 vdc), so the inverter cables to handle that load are doubled up 4-0 copper, each nearly as fat as a thumb!

The whole point here is that not all 12-volt thingies, doo-dad's and gizmo's are safe to touch.

Safe spinning (and touching),

Brad Vietje

Newbury, VT