Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

leg stock

Posts

leg stock

#1

leg stock

Carol Reed

>For John and Gary, regarding the leg stock I am hoping to find.

It needs to finish out at 2 1/2" square. Lengths from 30" to 60". Plans are for tables and dressers. Currently I have walnut and cherry on hand, but will be looking for more; also some maple.

Another project for maple is a trestle type table. So 8/4 stock for the legs and top. I haven't decided yet on chairs or benches.

As long as I am towing the trailer, I will bring my shopping list. Trailer limit is 1000 pounds.

Green is OK but it will have to be sealed real good before I tow it home. I can't get to all my projects right away and stuff dries too quickly here in Arizona.

This really kinda of exciting. I've not built furniture for myself before. But I have been drawing plans for a while....

Thanks, guys. I will have to start funding a lumber budget.

Re: leg stock

#2

JL

Carol - I can get you hard maple.

JL

>I've got a few boards I can spare. I've got 8/4 oak and 10/4 maple. I may even have a piece of 12/4 maple somewhere. I don't have any hard maple suitable for table tops. I do have some 5/4 oak, 5/4 birch and some 5/4 soft maple. I even have some skinny 8/4 soft maple leg stock (33" stuff).