Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Assistance needed in locating a tool

Posts

Assistance needed in locating a tool

#1

Assistance needed in locating a tool

AndiWolfe

>I'm trying to find a small motor similar to the Pfizer micro sander unit. I'd like to modify it for taking some small carving burs for some fine detailing. Does anyone have a suggestion on where I might find such a specialized motor?

Thanks - Andi

Re: Assistance needed in locating a tool

#2

Steven Antonucci

My first thought was RC car motors

Steven Antonucci

>I don't know the specs you need, but I think RC motors rev up pretty good and have some pretty good torque. They run in dusty environments, so they might be a fit?

Re: Assistance needed in locating a tool

#3

Re: Assistance needed in locating a tool *LINK*

John Lucas

>Andi They have some really cool motor driven tools in MicroMark tools. Frank Sudol used to use their mini jigsaw.


http://www.micromark.com/

Re: Assistance needed in locating a tool

#4

Re: Assistance needed in locating a tool

AndiWolfe

>Aha! The RC motor is what I was looking for. Thanks, guys!

Re: Assistance needed in locating a tool

#5

How are you getting a chuck on that? torque?

Dick Coers

>I suspect those motors have almost no torque. They all run very high rpm and run through gear boxes for use on the cars.

Re: Assistance needed in locating a tool

#6

Also no thrust bearings to handle load.

Dick Coers

Re: Assistance needed in locating a tool

#7

Re: Assistance needed in locating a tool

JB

>why not turn a small adapter for your sander to hold the 1/16" bits

Re: Assistance needed in locating a tool

#8

Re: Assistance needed in locating a tool

AndiWolfe

>The sander is one of those RC electric motors, too, I think. I found a double-ended pin chuck that should work for my needs. I'll post a follow-up once I play with this idea a bit.

Re: Assistance needed in locating a tool

#9

Re: Assistance needed in locating a tool

steve worcester

>If it is a 12V motor, you can always plug it into a model railroad power controller (which works as a power source for it) and adjust the speed. I did that for a glass grinding "assperiment" that I did and it worked real well.