Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Turning Burls

Posts

Turning Burls

#1

Turning Burls

Brent Smith in Montreal

>Can anyone direct me to an online tutorial on turning burls (video, pictorial or text)? Anything but Youtube please. I'm one of those unlucky ones that always get the update flashplayer message.

Thanks

Re: Turning Burls

#2

Re: Turning Burls

Jorge Casta�eda

>Brent,

I am one of those unlucky souls still in a rotten dial up, that cannot watch any video, not even in you tube, so I cannot point you to anything, but I happen to have a couple burl waiting for me to figure out what to do with them, also, have some pieces left over from previous turnings.

From my experience, turn it green, the dry ones are extremely hard, I have both cherry and sugar maple. Sometimes they have voids and very often they also have grit, so the tools dull frequently. They do not seem to move too much but you can leave some meat and turn them again if you wish.

The worst part is deciding where to make the first cut, once you do that it is self explanatory more or less. Don't wait. Go for it!

It's snowing, great day for turning.

Jorge

Re: Turning Burls

#4

Brad Vietje

Whatcha got Brent ?

Brad Vietje

>Well, there's not much turning happening here, so let's have some good, clean fun...

If you post a few photos of the burl(s) in question, we'll all tell you how to cut them up! Or, rather, we'll all tell you how we might cut them up. You can narrow the discussion a bit by telling us what you'd like to make -- bottle stoppers, bowls, pepper mills, boxes, jewelry, etc...

Problem is, there's an infinite number of ways to cut up and turn a burl, depending on what you want to make, and what you find when you cut into the thing. My prediction is, if you ask 100 turners how to cut up a given burl, you'll get at least 125 answers!

But post some pix anyway, just for fun! I'll post a few burl pix later to get the ball rolling...

Safe spinning,

Brad Vietje

Newbury, VT

Re: Turning Burls

#5

Brad Vietje

More Practical Advice

Brad Vietje

>Handling burl wood will depend on what it is, how wet/dry, how thick, whether or not you intend to retain the bark, etc...

In my experience, burl wood is often more stable than "plain-Jane straight-grain" wood from the same log. I've mostly used Black Cherry and Boxelder burls and they tend to season after rough turning with very few losses. A good friend makes his living turning burl bowls, and he rough turns Boxelder burl and sets it near the wood stove to dry it, and it only rarely cracks. I don't recommend that treatment, but the risk of the wood splitting is often less than something turned from straight grain wood. Burls of some species tend to develop smaller cracks and voids as the dry, and you can either fill them, or leave them be.

The desired end result will also influence how you handle the wood. If you are going for a precise-fitting lid on a box, or a high-loss polish on the finished piece, you'll want to rough turn, air dry, then finish turn, sand, polish. If you want a more wrinkled or textured end product, finish turn and sand while the wood is wet, and allow it to crenelate a it dries.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Turning Burls

#6

I got

Jorge Casta�eda

>Here is my stash:

a cherry burl and, surprise!, I did not remember, but the maple one is not a burl but a root ball, never turned one before

I think I will take a slice or two of the most irregular hemisphere and from the more regular make the biggest possible bowl and core it and make 3 or even 4 out of it, plates from the slices and then figure something with the reminder.

The maple root ball has one stump in one side and two in the other, humm, multy axis? Maybe just same plan as with the cherry one.

Both are 14" - 16" in diameter at the widest, more oval than round.

Soo, what you would do with these?

Thanks

Jorge

Re: Turning Burls

#7

roots

John K Jordan

>I've cut up and turned several root balls and other roots (some box elder root to die for!) and just a comment if you haven't done it: be prepared for dirt and stones embedded in the wood. Hard on a bandsaw blade!

JKJ

Re: Turning Burls

#8

Re: Turning Burls

Brent Smith in Montreal

>Thanks all for the info!

Sorry Brad, but no camera.

I have some Red Mallee burl, some Jarrah, some Maple and a Fair sized Walnut burl. I'm still fairly new to bowl turning and was wondering about how to go about starting on these pieces.

Thanks fgvanatta for that link. I actually bought some of the burls from Steve, but didn't see that tutorial on the site at the time.

Re: Turning Burls

#9

Re: roots

Jorge Casta�eda

>John,

Thanks for the heads up.

Jorge

Re: Turning Burls

#10

Brad Vietje

Re: Turning Burls

Brad Vietje

>Hi Brent,

What are you comfortable turning right now?

Unfortunately, green or fresh-cut wood does not store indefinitely without changes. Some changes can be good, others could cause cracks, staining, or other problems. I've gotten some Red Mallee burl and a few other exotics, which have been waiting way too long for me to decide what to do with them , since I've moved, started a business, and I'm now involved in building a new house.

Here's my 3 cents:

1. Take one you are least worried about (most readily replaced, perhaps), or the least stable, and cut it into pieces you are prepared to deal with now. This could be boxes, tool handles, wine stoppers, small gift items, pens, etc..., and start having fun making beautiful things ASAP. If the burls are green, its worth getting Turning Green Wood, by Michael O'Donnell. He doesn't deal specifically with burl wood, but with the drying and seasoning process, and great practice exercises for turning bowls. Up in your area finding another Maple burl should not be real hard, so don't feel like it's the treasure of a lifetime -- there will be more of them.

2. Wax any exposed cut faces of wood you store with some sort of end grain wood sealer, paraffin wax, or old latex paint. Something that dries clear is always my preference, so I can see what the wood is like later.

3. Learn how to turn bowls, one-on-one, if possible. I'd suggest finding a local turning group and introducing yourself as someone who would like some help learning to make bowls -- you'll get a lot of help offers. You can also consult Bill Grumbine's excellent DVD, Turned Bowls Made Easy, which covers bowl turning from log to table, or Richard Raffan's fine book and/or video Turning Bowls with Richard Raffan. Nothing beats learning at the lathe with a mentor to guide you.

Enjoy the wood, and I hope you get a camera soon so you can show us what you make.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Turning Burls

#11

Re: I got for Brent

Randall Hodge

>Brent's Burl's- Jorge is giving you the best advice. Look for the portion of the burl that will yield the largest turning then go from there with your imagination and what's left. Usually the grain orientation isn't a concern with a true burl.