Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

The place where bad turnings go...

Posts

The place where bad turnings go...

#1

The place where bad turnings go...

Bill Grumbine (Kutztown PA)

>After reading Paul Zerjay's thread "Distraught", and a back channel conversation, I thought I would post a picture of where bad turnings go.


This is the fiery pit, where those turnings which were not good turnings are consigned forever. :b Actually, this is the inside of my wood furnace, and it really is the place where bad turnings go. It is a scant 100 ft from my shop, so I can burn the evidence before it comes to light. The "model" is a demo bowl that had the pith in it, a big crack, and had weathered out in the rain and sun for who knows how long, so it wasn't like I burned my next entry to the county fair. It is nestled in between huge chunks of mulberry, and English white oak. I had high hopes for the white oak, and actually got a couple of very nice bowls from a burl on the tree, but the rest of it was afflicted with ring shake throughout. The good news is, it is chock full of BTUs, something important at this time of year in a 200 year old stone house. :D

Re: The place where bad turnings go...

#2

Re: The place where bad turnings go...

Paul Zerjay

>It doesn't take a 200 year old house to appreciate BTU'S.

Re: The place where bad turnings go...

#3

Re: The place where bad turnings go...

Carole Valentine

>I have one of those...it's a rusty 50 gal steel drum.

Re: The place where bad turnings go...

#4

Re: The place where bad turnings go...

Galen Vetterick

>Ames, Iowa has a solid waste facility that the "burnable waste" is used to fire the city electrical generators. I estimate what I contribute in turnings powers my lathe for free.

Re: The place where bad turnings go...

#5

Re: The place where bad turnings go...

Cyril Griesbach

>I have always been inclined to follow Bill's direction with bad turnings and burn them but I usually keep some on hand to use for experiments using other techniques such as carving and other surface enhancements. No need to practice a new process on a good turning and then screw it up.

Re: The place where bad turnings go...

#6

Re: The place where bad turnings go...

Stuart Johnson

>Start turning Mesquite and buy briskets and ribs. You never have a turning mistake because you were just filling the smoker.

Re: The place where bad turnings go...

#7

Re: The place where bad turnings go...

Dale Sherman, Manlius, NY

>Could you fill the bad turnings with wood shavings and sell them as fire starters?

As my wife says, "It's getting cold, could you turn another bowl for the stove?"

I feed so many turnings to the woodstove that now my turning designs focus on getting good combustion airflow around the wood fuel.

Bill, if you ever end up freezing, it's because you've achieved turning perfection every time.

Dale