Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Piercing questions

Posts

Piercing questions

#1

Piercing questions

Mike Foster

>OK, so now I'm committed to trying a pierced piece. I have an open form turned to about 1/16", sanded and ready to pierce. I pierced one hole and cleaned it up with files and all seems to look OK. I have not seen Binh Pho do his magic, but imagine some of you have. I just ordered his DVD,s but want to start piercing this piece this weekend. I would like to color the inside of this piece differently than the outside and was wondering how that is usually done. Do you color the piece before piercing, then mask and frisket the outside to airbrush after piercing?

Re: Piercing questions

#2

Re: Piercing questions

john lucas

>Mike If my memory serves me correctly Binh does all the piercing before painting. It's been several years however to I could be wrong. The black edges help hide any airbrushing. I can't remember how he protects the inside while painting the outside.

Re: Piercing questions

#3

Re: Piercing questions

Hal Taylor

>Mike, Binh's DVDs will give you most of the answers. He mostly pierces then paints. There may be situations when you might paint then pierce though. For painting the inside - I can't remember if his DVD shows that, but he paints (airbrush of course) the inside last. If you point the airbrush to the bottom center (about 3-4 in.) then slowly pull it out as you are spraying, very little, if any, paint gets to the outside sides. It blows out the top, and it results in a gradient with the most color at the bottom. Hope I've made sense.

Re: Piercing questions

#4

Re: Piercing questions

Mike Foster

>Thanks Hal and John. I took John's advice and went ahead and did some piercing tonight. It's kind of fun. There is a learning curve, but I think I'm already improving. I've made some minor mistakes that I think most people won't notice and may be unimportant with the final piece. I've also found that keeping the grain of the wood in mind while piercing makes a difference in the amount of burning and the amount of fuzziness. I've also found that the burn marks can be cleaned up with a light touch. Hal, your description of airbrushing the inside makes total sense to me and I'm glad you posted that. I wonder if this piece will act like Binh's. If I don't break it first, it will be mostly air when done, unlike Binh's pieces that have a lot of solid sides so the air/paint flow may not be as directed as with a more solid form. It will be fun to play and learn with that as well. Thanks again.

Mike

Re: Piercing questions

#5

Re: Piercing questions *LINK*

john lucas

>Mike Look at Malcolm Zaner's lace series. You don't have to paint it and you don't have to leave much wood. His pieces are great.


http://www.malcolmzander.com/

Re: Piercing questions

#6

Re: Piercing questions

Hal Taylor

>I hope you will share the results - I'd really like to see the progress. Regarding airbrushing - I don't know if you've done it. If not you need to.

I had the pleasure of having Malcolm at my house and he showed me how he turns and pierces. One thing I remember him saying is he has CA glue close at hand and he uses some small applicators he gets from Lee Valley as I remember. I'll check on that source.

Have fun!