Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

First photo post

Posts

First photo post

#1

First photo post

Lan Brady

>Well, I finally attended a class on how to use a digital camera. It was taught by fellow WC'er Jim Terry. He did a great job. Anyhow, Since I cannot do anything becasue of the snow. I have tried to begin practicing what he taught. I still have a way to go, but you gotta start somewhere.

This is an unfinshed maple bowl with a texture trim ring.

Critiques on the bowl or photo will be appreciated.

Thanks, Lan


Re: First photo post

#2

Ellis Walentine

Lookin' good, Lan

Ellis Walentine

>I'm sure the photo mavens will offer you some tips on massaging your image, but the bowl looks very shapely. I'll bet it'll be a knockout when it's done.

Good work with the picture post.

Ellis

Re: First photo post

#3

Re:Several suggestions re: the photo, and

JamieDonaldson

>... I see that your instructor was not a specialist with craft images. The background folds in the fabric are distracting, a reason I recommend a white vinyl window shade without texture. The image itself is overexposed, lacking separation/contrast between background and wood, and for light colored wood like this a gray or even black background would better emphasize the true wood color. The image is also cropped too tight- leave a bit more room around the edges. The focus and depth of field are right on, and as you practice using light, a softer source will leave soft rather than hard shadows that can also be a distraction from the primary subject matter, the turning.

Re: First photo post

#4

Re:Several suggestions re: the photo, and

Lan Brady

>Jamie,

Thanks for the help. I need a lot of practice on these things.

Lan

Re: First photo post

#5

Re:Several suggestions re: the photo, and

john lucas

>It looks like you've got the important things there. It's in focus and the color is correct. Jamie is right. If your going to use these to enter shows don't use a white background. I've been warned on that by too many jurors. Sometimes white is necessary to show a piece but usually a neutral gray is much better.

Rig up your top light so you can move it easily. I built a boom arm for mine. The reason this is important is that it has to be easy to do. If it's not most people won't do it. You would have been able to see the texture on your rim with the proper light placement (and exposure as Jamie mentioned). I know why you picked the exposure you did. The front is too much darker than the top and you were trying to see the texture in the front. This can be a very tricky thing to balance on bowls that are really open. I use an 11x14 plastic mirror to bounce light back in to the bottoms. If that's too much try a white card. Be careful with the mirror. It will actually throw shadows on the back ground so placement is critical.

Have fun with it. If your having difficulty back up and take a photo of the whole set up with the lights showing. Then post that. I'm sure we will be able to help. If you don't feel comfortable posting it send me an e-mail. I can usually solve the problems. I shoot things like this every day.

Re: First photo post

#6

Re: First photo post

Cyril Griesbach

>I'm not qualified to respond on the photo but you've already gotten some advise from two of the best. The bowl, however, looks great.

Re: First photo post

#7

Re:Several suggestions re: the photo, and

Jim Terry

>Jamie, I wish you could have attended our session last week. I am sure you could have added the professional touch we could have used. I am just an armature photographer but I have tried to share what I have learned from my own trial and error and from this forum. Our session last week centered on backgrounds, lighting, phrugal photo setups. We used a seamless grey background and discussed the effect of direct vs. diffused lighting, position of lights etc. Lan has not had a chance since the session to obtain a setup like we were using. The photo below is just a quick photo we made at the session of a turning one of the members brought. It was shot with a diffused quartz light on the upper left and a white card bouncing some fill light to soften the shadow on the lower right. It was shot f16 at � sec at about 55mm lens length. I would welcome your comments on it. Jim

Re: First photo post

#8

Re:Setup and exposure are excellent,,,...

JamieDonaldson

>... but the camera may have been on autofocus and targeted the front of the bowl, diminishing the DOF available at f 16. A point of critical focus 1/3rd behind the front(and 2/3rds in front of the backmost point)yields max. DOF, and that requires manual focus override capability. By using the gray background you have reduced most of the need to manually adjust exposure compensation caused by high reflectance of a white background, but some folks sputter at the cost of fragile roll paper backgrounds! The paper needed to have more uniform sweep in the back to eliminate the visable transition area shadows from horizontal to vertical. The shadows on the R side of the bowl could be filled more with adjustments to your bounce board angles. The crop is a bit loose, but ideal for master image files that might have to be cropped differently in the future, such as square for jury submissions like Zapp. All in all it looks pretty darn good!

Re: First photo post

#9

Re:Setup and exposure are excellent,,,...

Jim Terry

>Thanks Jamie, You are right, the focus point was too close to the front. We were using manual focus on the lens but did not take enough time to refocus when this piece was placed down. I chose not to crop or alter this photo in Photoshop other than to resize it in order to show how the original looked.

Re: First photo post

#10

Re:When I'm doing critical camera work .....

JamieDonaldson

>....like this I plug my camera into a 19" monitor right beside the set-up, and that aids me in seeing an enlarged view of exactly what the camera is seeing. The tiny VF's on camera backs isn't sufficient, especially as we get a bit more mature in age!

Re: First photo post

#11

Re:Several suggestions re: the photo, and

John K Jordan

>Jim, looks to me you make the same mistake I do. About half the time I fail to notice the camera is not level and get a tilted image I have to fix in Photoshop. Fortunately, there is a very simple but little known feature in Photoshop to put the horizon or verticals right without trial-and-error (using the measure tool/rotate canvas arbitrary tool).

I like the lighting on this one.

JKJ

Re: First photo post

#12

Re:Several suggestions re: the photo, and

Jim Terry

>John, I agree that is a handy tool in Photoshop. The tripod I am using is over 35 years old and is much sturdier than any of my newer ones, however it has an older head that is not quite level. The tripod got moved around a lot that day without getting leveled. I just hate to spend $90 for a good tripod when I could buy another tool from Doug for that.

Re: First photo post

#13

Re: First photo post

Lan Brady

>Cyril and John,

I appreciate the comments. Photograhy is not second nature to me.

The direction from Jamie and John is very helpful. I tried to get a better background today at Walmart but no luck. It is amazing the amount of people that fought 8" of snow to go.

I have been experiementing this afternoon, but my work is not much better. It will take time.

Thanks again, Lan

Re: First photo post

#14

Re:Lan- keep practicing, because the .....

JamieDonaldson

>...film is cheap! I believe you'll find a better selection of shades at Lowes or Home Depot, and check that they don't have texture and are not shiny. The thicker vinyl resists wrinkles better than the really cheap thin shades.

Re: First photo post

#15

Re: First photo post

John K Jordan

>For background I like to use a piece of gray mat board, the kind made for matting in picture frames. The surface is perfect, it comes it a variety of shades, impossible to wrinkle, and it is thick enough that it is easy to make a gradual bend. (actually difficult to NOT make a gradual bend)

JKJ

Re: First photo post

#16

Re:JKJ-impossible to wrinkle? Just don't ..

JamieDonaldson

>..........let it fold, because those wrinkles are terminal!

Re: First photo post

#17

That'll do nicely Lan !

Don Orr