Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Beaded Ash Pot

Posts

Beaded Ash Pot

#1

Steve Kubien

Beaded Ash Pot

Steve Kubien

>I am long time fan of the pots Richard Raffan and others make. I've played with them before and produced a fair bit of kindling in the process. Today, this little guy was born and for once, I am pretty happy.

It measures 3�" at the widest point and approx 3" tall. The outside is blackened with india ink and then it got waxed, liming style and buffed.

For you liming wax experts, help me out... Can I expect it to be more pronounced if I apply another coat or is it just going to get buffed away?

comments and critques are appreciated.

Re: Beaded Ash Pot

#2

Re: Beaded Ash Pot

fgvanatta

>Very nice pot and finish. Methinks I would ebonize the inside also - that's just me.

Re: Beaded Ash Pot

#3

Re: Beaded Ash Pot

GaryG in MD

>Nice little pot, Steve. Is the bottom round? ...Gary

Re: Beaded Ash Pot

#4

Steve Kubien

Re: Beaded Ash Pot

Steve Kubien

>As I stood there looking at it on the lathe, I wondered about inking the inside. My original thought was to leave it as is and as I wondered about it, I decided to stick to my gut-reaction (If your gut was as big as mine, you would listen too!).

One of the things that worried me about doing the inside was the liming wax. I have no conical or spare round buffs to get inside to clean it up. Perhaps that is something to add to my shopping list.

Thanks for your opinions. I truly appreciate it.

Steve

Re: Beaded Ash Pot

#5

Steve Kubien

Re: Beaded Ash Pot

Steve Kubien

>Thanks Gary. The bottom has about an 1�" hollow at the bottom so it sits flat. A round bottom is the next thing.....

Cheers,

Steve

Re: Beaded Ash Pot

#6

Neat!

Jorge Casta�eda

>Steve,

I do like the shape and the leaving the wood as wood in the inside; the outside to me is overdone, it you could tone it down so the black is translucent and one can see wood, it will gain a lot.

My $0.03 adjusting for inflation.

Jorge

Re: Beaded Ash Pot

#7

Re: Neat!

John Jordan

>Get yourself a little stainless steel brush-looks like a tooth brush, 3 x 7 (rows of 7 tufts) they are sometimes called. It will brush out the early wood without scratching the harder wood, Then lightly sand for stray scratches and the opened grain will give the wax somewhere to go. Thin acrylic washes also work well.

John

Re: Beaded Ash Pot

#8

Re: Beaded Ash Pot

Don Evans

>A simple matter of opinion but I think it would be much better to leave it as is, I do think that a lid for it would be great improvement simply for the surprise effect that the inside grain and color would give when removed and a peek inside.

Without the lid you lose that surprise and of course effect.

I would leave as is and make a lid but due to size I would leave off a finial but make the lid concave turning up in center with short point.

Don

Re: Beaded Ash Pot

#9

karl jr

Re: Beaded Ash Pot

karl jr

>Very nice. I like the way the early wood shows. It adds a subtle, textural contrast. As for myself, I haven't built up the nerve to try color on anything but ebonized finials.

Good job.

Re: Beaded Ash Pot

#10

Steve Kubien

Thanks Jorge and John

Steve Kubien

>Hmmm, many things to think about and new things to try on future pots. I do think ash lends itself to this sort of work. Now, I've got to see how much I have and keep playing.

Re: Beaded Ash Pot

#11

Steve Kubien

Re: Beaded Ash Pot

Steve Kubien

>Colouring pieces can be a little unnerving...Will it work? Will it be firewood? It gets tougher when you have a piece that, even without the colour, you really like. I could have been happy just oiling this little guy and letting it darken/age. Still, I knew what I wanted to do before I put gouge to wood so it was easier.

Re: Beaded Ash Pot

#12

Re: Beaded Ash Pot

Philip Duffy

>Looks great to me just the way it is. BZ. Phil