Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Outboard specs for woodfast lathe?

Posts

Outboard specs for woodfast lathe?

#1

Outboard specs for woodfast lathe?

Mike Foster

>I have an old woodfast lathe MC 908 and just ran into an issue I didn't realize existed. I decided to upgrade to a Oneway rotary vacuum adapter and just ordered a 1 1/4 x 8 insert for it. I opened the box put things together and went to install on the lathe and was surprised to find the outboard thread not the same as inboard. The spindle size is 1" and I would guess that the threads are the standard 10 tpi, but was wondering if anyone here knows the real scoop. I may have to resort to counting, but this was easier. The manual that woodfast sent with the lathe is useless. It is bare bones to begin with, but the specs do not match what was manufactured for the American market and sold by Craft supplies where I bought the lathe. I did a google search and came up empty handed. So, does anyone know the outboard spindle specs for this lathe?

Re: Outboard specs for woodfast lathe?

#2

Re: I tried to help you Mike, but.....

JamieDonaldson

>...I couldn't unscrew the original hand wheel from my old Woodfast 409. I suspect the thread pitch is the usual 8 tpi but eyeball spec for the diameter is very suspect!

Re: Outboard specs for woodfast lathe?

#3

Left hand thread ?

Doc Green

>Jamie, the thread on the handwheel of my Jet mini is left handed. Could it be that you . . . ??? ~Doc

Re: Outboard specs for woodfast lathe?

#4

Re:It is LH threaded as are most .....

JamieDonaldson

>....outboard spindle threads, but it's been on there a long time. I wasn't going to be so helpful to Mike that I needed Ruth's monkey wrench to do the job!

Re: Outboard specs for woodfast lathe?

#5

Re: I tried to help you Mike, but.....

Mike Foster

>Jamie,

Thanks for trying. I resorted to counting the threads and you were right. LH 8 tpi. Sent the insert back for the right size today.