Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Latest American Woodturner Issue- YES!

Posts

Latest American Woodturner Issue- YES!

#1

Latest American Woodturner Issue- YES!

charlie belden

>The January 2010 issue of AAW�s American Woodturner just may be pointing to where the AAW is heading � and to me at least � that�s very promising.

Let�s start with the cover. The piece shown on the cover doesn�t look like anything you�d think of as a turning � at all. And when you open up the magazine you�re again faced with two pages of pieces that initially don�t look like they were turned either. OK � so there are parts of some of these pieces that look like they were turned � i.e. � single axis symmetry � familiar ROUND. But the rest of them? Well they don�t look like what is normally thought of as �turnings�. The article's author - an the turner who made the pieces shown - did an article on multi-axis turning in an earlier issue - and has clearly taken her interest in multi-axis turning well past her earlier exploration.

Turn the page again and you have the table of content � and a mix of the familiar, the becoming familiar and the very unfamiliar - something for everyone � something old, something new but nothing blue.

Keep going and you you�ve got a President�s Letter that promises returning the focus of AAW on Turners � not museums, galleries and collectors � but the people who actually MAKE things � mostly out of wood � and mostly using a lathe.

The next four pages promote the Hartford AAW Symposium with photos of the scheduled demonstrators and an example of their work as well as a brief description of what they will be demonstrating. It�s a pretty diverse group � in age, nationality, gender and styles/techniques. There�s even a well-known furniture maker , Michael Fortune, who brings woodworking techniques that are new to woodturners and which may open up new turning opportunities. If it didn't require flying all the way acrossed the country - I'd seriously consider attending this symposium.

Keep going and you find that TIPS are back � two pages of them.

Finding ELEVEN well illustrated pages, with accompanying explanatory text, on Turning Diamonds � the method used to turn that unfamiliar piece on the cover � along with really interesting examples of what can be done with the techniques � should set many turners� minds spinning � with the possibilities � be they new to turning or old hands at the lathe.

This appears to be another example of where AAW is heading � out beyond just single axis symmetry � way, way out from single axis symmetry. Not just showing finished pieces from one of the outer limits of turning , but also showing and explaining HOW they�re done � in sufficient detail that a lot of turners can actually try their hand at. Museums, galleries and collectors are interested in these pieces � and that�s a good thing. But the turner wants to know HOW. HOW are these pieces TURNED? This featured article reveals the HOW.

While reports from the Outer Limits are now included in the magazine, essential basics are not overlooked � six pages by Russ Fairflield with the catchy title of �The �Compleat (sic) Woodturner� . It gets back to Spindle Turning � tools, sharpening and turning � on a single axis � between centers. Three pages on making Hybrid Bottle Stoppers � with well illustrated five pages How To photos continue with Back To Basics and a primer on four jaw scroll chucks provides useful info for even a newbie, but maybe something for even and advanced turner � some things to be aware of � because it may not be obvious � but quite useful to know.

The rest of this issue contains more ideas and info � about TURNING � and TURNERS - inspirations perhaps for a reader�s Next Piece or some future piece.

This issue is different from issues that went before it, though I�ve only been through maybe the last three years of the magazine. And I�ll admit that I only joined the AAW initially because membership was required if I was to turn at a club meeting or one of the activities the club participates in.

Unlike earlier issues nothing in this issue caused a jaw clenching, teeth grinding, reaction.

No �But it�s a split, cracked and burned chunk of wood � with a shallow hemisphere turned in it - that�s painted RED!�

No Page After Page of Art Speak

No artsy critique of a gallery opening/show � which happens to include a few turned pieces.

No Why Devote Pages To Stuff That Wasn�t Turned! ?

No That�s Interesting � But How The Hell Was It Done?

I found, instead, page after page of interesting stuff � that I can actually use � for some future turning � or really appreciate, even if I never try it, �secrets� a turner shared � clearly, concisely and inspirationally (is there such a word?).

If this is where the magazine is heading � I very much look forward to the NEXT issue.

Thanks to Betty, Russ and all the other contributors of this issue.

More Please!

Re: Latest American Woodturner Issue- YES!

#2

But Charlie -- how do you really feel?

GaryG in MD

>Good analysis. I also think it's a very good issue.

I have two of Barbara Dill's pieces in my personal collection, and I would say her recognition is well deserved.

The Diamonds are definitely intriguing, and the technique opens up a myriad of directions for exploration.

An article about chucks? Will wonders never cease? Very practical, and Dick Gerard and Stan Wellborn have hit the nail on the head. Note that the photos and drawings are by Ed Kelle -- Ed, yet another talent?

John Lucas continues to present some practical tips.

Well done Betty et al.

...Gary

P.S. Please note that your Membership card is on one of those pullouts -- don't throw it away!

Re: Latest American Woodturner Issue- YES!

#3

Re:Very interesting, and my issue has .....

JamieDonaldson

>...yet to arrive, but I received an open email to the AAW and membership from a turner(I guess?) that was avidly complaining about all the artsy/fartsy content that was hogging the majority of the several recent issues. He wants to get back to turning stuff only, not a very eclectic outlook in my opinion.

Re: Latest American Woodturner Issue- YES!

#4

Maybe I should rejoin

Aage Rendalen------WebKitFormBoundaryNP+N1miAQHQug

>I hope you're right. I let my membership expire because of the magazine. A magazine should aspire to inspire but focusing on the Van Goghs of the woodturning world has the opposite effect. If you define woodturning as the art of being Bin Pho, the majority of us might as well quit. On the other hand, it's possible to set your sights too low. Issue after issue of run-of-the-mill projects explained in excrutiating detail can be just as bad. I think most of us would like the magazine to reflect the realities that most of us face, but with ample coverage of work that is so good that we shall always have something to aspire to.

Re: Latest American Woodturner Issue- YES!

#5

Re: Latest American Woodturner Issue- YES!

Rik, WI

>Charlie you couldn't have said it better. This was first issue in a long time that I read it cover to cover and wanted more.

Re: Latest American Woodturner Issue- YES!

#6

Re: Latest American Woodturner Issue- YES!

john lucas

>Well I've always liked it. I thing this issue is excellent as well. I have loved Peter Exton's work for a long time. As someone who has played quite a bit with inside out turning so when I first saw his work I knew he had taken it to a new level. Haven't finished the magazine yet because I've been at the TAW symposium so it will be fun reading the next few days.

Your forgot to mention they have gone to 6 issues now.