Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Turning Monkey Pod

Posts

Turning Monkey Pod

#1

Turning Monkey Pod

Bill Neddow

>I need some advice. I have two big, soaking wet pieces of Monkey Pod. Is it best to turn it green to a finish product, or to leave it thick for re-turning later? Does it warp much? (These are cross-sections across the tree so the knots will show as radiating out from the center.) I have never had a piece of this wood before and do not want to blow it up through sheer ignorance.

Re: Turning Monkey Pod

#2

Re: Turning Monkey Pod

Bill Neddow

>Woops. That should be Monkey Puzzle. My brain is getting less and less reliable -- I have to start checking things more carefully.

Re: Turning Monkey Pod

#3

Re: Turning Monkey Pod

Gary Ljostad

>Bill do you have Monkey pod or Monkey Puzzle? Monkey pod is similar to Koa in grain and coloring. It does not have branches in rings around the a main trunk. Monkey Puzzle is similar to Norfolk Island Pine and Cook pine. You mentioned the ring of knots which makes me think it is Monkey Puzzle. If so I treat it like NIP and turn it to finished shape green followed by a long soak in oil mix to get translucence. Hope this helps. Here is a web site showing the trees.

www.hawaiiwoodturning.com/trees.html


Re: Turning Monkey Pod

#4

Re: Turning Monkey Pod

Bill Neddow

>It definitely is Monkey Puzzle, Gary I will follow your advice.

Re: Turning Monkey Pod

#5

Re: Turning Monkey Puzzle

david------WebKitFormBoundary4+uSADSoemuCbQzw-----

>Bill: Check the gallery pages of the Honolulu Woodturners website. Tons of photos of Norfolk Island Pine stuff there. Monkey puzzle character is supposed to be similar to Norfolk Pine. As a softwood, Norfolk Pine turns easy and moves very little. Can be turned thin in one step. Will have stress cracks when drying only if the foot is very different thickness than the walls. Tool marks and wood fiber bruises very difficult to avoid, so about 3/16" thickness is recommended because hard to avoid use of sanding to remove tool marks and scratches. Fortunately, sanding is easy if you go through all the grades.

Re: Turning Monkey Pod

#6

Re: Turning Monkey Puzzle

Bill Neddow

>Thanks, David. I definitely will follow this advice.