Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Carving project video part 2

Posts

Carving project video part 2

#1

Carving project video part 2

AndiWolfe

>I'm making progress on my carved turning. Here's a longer video showing some of the detail carving and sanding.

Warning - if you don't like the dentist office, you might want to turn the volume way down until I get to the sanding. This video clip is 7:17, sanding starts at around 4 min.


Re: Carving project video part 2

#2

Re: Carving project video part 2

John K Jordan

>This is great! I didn't get to watch the whole thing right now but I will later.

What is small tool you are using for sanding?

JKJ

Re: Carving project video part 2

#3

Re: Carving project video part 2

AndiWolfe

>John - I'm using a Pfizer micro sander. Bruce Hoover (The Sanding Glove) sells them. It's a great gadget, but I wish I had one size smaller mandrel for getting into the very tight spaces.

Re: Carving project video part 2

#4

Thanks for the video.......

jake Niedling

>It sure gives us an appreciation for all the work you put into your wonderful pieces. I think this video feature is a nice addition to Wood Central. Appreciate you taking the time to share with us.

Re: Carving project video part 2

#5

Re: Thanks for the video.......

AndiWolfe

>Jake - you're welcome. I hope this short clip gives people some insights into my carving work flow. I think I'll do a start-to-finish video series on the next piece I carve, but this is a good place to start.