Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

is anybody turning?

Posts

is anybody turning?

#1

is anybody turning?

john lucas

>I see an awful lot of testing the new format. Following all the posts and trying what you all are suggesting I'm getting back to normal on this board.

I have been turning today. Well actually carving, glueing, turning and finishing. I've been trying to finish the clocks I started a week ago. I turned another mirror that was segmented and started the finishing. I also recarved 2 of the ones I posted a couple of weeks ago. I just didn't like the way they looked. I'll post photos as soon as I get a few more coats of finish on them.

I've also been doing to metal work. I'm trying to make some special adaptors for out light stands. I got everything turned, cut and filed. Hopefully the weather will be good enough to weld them tomorrow.

I have an idea for a new Hunter tool. I hope to build one tomorrow and run some tests. I don't know if it will actually work but it will be an interesting tool if it does.

Re: is anybody turning?

#2

Re: is anybody turning?

Bill Grumbine (Kutztown PA)

>I did a short demo for some customers on Thursday that may net me a very nice job, plus some lessons down the road. But Friday was flat work day, building some cabinets all day long. And today was range day, in which many rounds of ammo were expended. :D I need to do some more turning soon though, to prepare for my time at Campbell, and I have students coming soon.

Re: is anybody turning?

#3

Don in central washington

Re: is anybody turning?

Don in central washington

>yup working with the new off center pendant tool!

a gallery owner came by to get some more turnings from me and saw them off to the side. and was all over them in seconds. Ended up taking two of them off herself and is going to approach her " jewelry" lady about buying them off me wholesale and doing her magic on them. Fine with me quoted her a price/each and she did not even blink.Our paths do not cross except maybe twice a year so not worried. about flooding the market hahaha.

Re: is anybody turning?

#4

Steve Kubien

Re: is anybody turning?

Steve Kubien

>I have had a tough time doing any turning so far in 2010. Probably burn-out from Christmas but I can't seem to drag my butt into the shop as much as I ought. Output so far for the year...a peppermill, 1/2 dozen razors, 1/2 dozen pens, finished up some bowls (3 or 4) and finished an urn. Not cool.

Steve

Re: is anybody turning?

#5

Re: is anybody turning? *LINK*

Jason Clark

>Yes, I've been doing a ton of turning. I started a blog back in August and have done some turning or something woodturning related (design, sketches, gathering wood, doing a show) every day, today is the 158th day in a row. My original goal was 30 days in a row and I've just kept it going and have no plans to stop any time soon.

I've posted a link to my blog below for those that may be interested.

Jason


http://agoodturndaily.blogspot.com

Re: is anybody turning?

#6

Re: is anybody turning?

Barbara Gill, Remlik VA

>A little when it is not raining. The rocket scientists we have here working on the farm have destroyed the road to my shop so that unless the ground is frozen solid. I have to walk in across the field so if it is raining I don't go in.

Re: is anybody turning?

#7

Like crazy!

Jorge Casta�eda

>John,

Living in the woods, there are few distractions, it helps that the shop is not heated and we have at least 2 feet of snow in the ground, so when I am not harvesting wood, I am in the shop, my goal is to have as many bowl and platter blanks roughed so when the thaw comes and the tilling the land starts, I switch mode from roughin to finishing,

So yes, I stay warm making loads of shavings...

Love it!

Jorge

Re: is anybody turning?

#8

Re: is anybody turning?

john lucas

>Bill I was going to go shooting today but the rain is going to stop that. I have to learn to point shoot my new 380 because you can't see the sights. It seems to be a natural pointing weapon so that should not be a problem.

Re: is anybody turning?

#9

Re: is anybody turning?

john lucas

>Don I've been trying to design a method of tilting that pendant jig. I like my pendants thin at the top and thick at the bottom. I have an idea but haven't had the time to build it yet. If you have any idea's let me know.

Re: is anybody turning?

#10

Re: is anybody turning?

Carole Valentine

>Mostly cutting up wood, practicing coring and prepping blanks for storage. I am working on what is for me, a larger piece - 8" x 4 1/2" seed pot style from Lime. It's in the carving stage right now. And no...nothing fancy...it takes me forever just to do simple carving! I may ruin it yet, but it's only wood. LOL

Re: is anybody turning?

#11

Re: is anybody turning?

Cyril Griesbach

>My mother is very old and had a fall right after the new year so taking care of her needs and taking control of her financial situation has kept me out of the shop for the last several weeks. I hope to see some light at the end of the tunnel soon.

Re: is anybody turning?

#12

Re: is anybody turning?

Carole Valentine

>Cyril, my heart goes out to you...I went through a long period of that type of thing with my Mom. I know it's painful for both you and her.

Re: is anybody turning?

#13

Malcolm Ray

Re: Like crazy!

Malcolm Ray

>Snow? You have snow up there?

Re: is anybody turning?

#14

Is your igloo holding neighbah?

Jorge Casta�eda

>Good to know you are stirring 8)

Re: is anybody turning?

#15

Re: is anybody turning?

Grant Wilkinson

>I blew up a bowl the day before yesterday. Does that count? I wanted to try my first undercut rim using a bowl gouge. Try, try again. (More lessons, Bill. :-) )

Re: is anybody turning?

#16

Re: is anybody turning?

John K Jordan

>Is it far? An industrious individual like you could saw some white oak and make a boardwalk. Or dump a truckload of chip mulch where it's muddy?

JKJ

Re: is anybody turning?

#17

Re: is anybody turning?

Carole Valentine

>LOL! Yeah Barb...you should lay down a plank road. :D

Re: is anybody turning?

#18

Re: is anybody turning?

John K Jordan

>>a method of tilting that pendant jig.

Can you make a way to use a thin wedge under the wood?

JKJ

Re: is anybody turning?

#19

Dick Hines

Re: is anybody turning?

Dick Hines

>Have been turning every day this week. Turning some boxs and today I was working on a big amrosia maple bowl. I will have it all sanded tomorrow and start on something else.

A friend of mine droped off a sycamore log today. 4' X 10". I am sure I will find something to do with it.

Re: is anybody turning?

#20

Re: is anybody turning?

john lucas

>John You could but you would have to reglue or use more double stick tape and you would also lose your center. I was thinking of a sort of Doorknob shaped aluminum ball that would fit in the chuck. The center would be tapped for 3/8x16 to match the pendant jig. I could cut some sort of slots so it would be easily centered and then maybe some more slots that the 4 jaws would fit in that would let you tilt it a little. I thought about just grabbing the door knob shape but then each time I started over I would have to recenter it. That could be done quite easily by simply putting the tailstock center in the hole I suppose.

Re: is anybody turning?

#21

Re: is anybody turning?

Barbara Gill------WebKitFormBoundarypTwA+e87REJF0d

>LOL too far for a boardwalk to drive on. Wood chips or sawdust is the last thing you would want to put in this mud.

Re: is anybody turning?

#22

Re: is anybody turning?

Barbara Gill------WebKitFormBoundarypTwA+e87REJF0d

>Carole I wonder how many trees it would take. :-)

Re: is anybody turning?

#23

Re: is anybody turning?

Barry Turner

>What are you shooting? Pistols?

Re: is anybody turning?

#24

Re: is anybody turning?

Rik, WI

>Peppermills and bowl sets. Trying to catch up from Christmas.

Re: is anybody turning?

#25

Re: is anybody turning?

Don at Central Illinois

>Finally got back into the shop after back surgery. Worked on a HF burl I've had on hand for several months. But had a design opportunity and it is taking longer than I planned. SWMBO, saw it, unfinished, and it's already spoken for. Feels good to be at the lathe again, since late summer last year.