Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

FYI Profiles

Posts

FYI Profiles

#1

Ellis Walentine

FYI  Profiles

Ellis Walentine

A Word About Profiles

Your best two-minute investment


The procedure for updating profiles proved to be pretty difficult for some people for a variety of reasons, so I've decided to mothball all the old profiles (all that have not been updated since we made the switch to the new 'boards.) If you updated your profile or created a new one within the past three days, you don't have to do a thing. If not, creating a new profile is actually less complicated than updating the old one and should only take you a couple minutes. Here's the drill...

1. Close your WoodCentral browser window and then delete any WoodCentral cookie(s).

2. Go to the messageboard of your choice. It should *not* welcome you by name. If it does, find and destroy any remaining cookies you may have missed.

3. Click "My Profile" in the navigation bar.

4. Fill out a profile, but don't type a password in the password box. Make sure you use a valid e-mail address. A new password will be sent to that address when you submit the new profile. (NOTE: You can change it any time in the My Profile dialog and you should change it immediately to a simple password that is easy to remember. The profile is meant only to identify you as a human and to tell you apart from roving spam bots.) (ANOTHER NOTE: Set Preferences might be used to change the username and password in the cookie, but that has no effect on the password stored WITH the profile on the server.)

5. Save your profile.

6. Close your browser. Wait for the confirmation email with your starting password.

7. Open WC in a new browser window, click "My profile." Enter your name and startpassword. Your Profile form appears. It should indeed be the exact same form as before, with all the same content but with additional password

boxes at the bottom. CHANGE YOUR password to a simple one.

8. Try posting a new message. On your first post TYPE the password; do not rely on the dots in the box. (Handy tip for future reference: TYPE the password if in doubt, do not rely on the pre-filled form.) At this point, you should see the formatting buttons and the smilies and the "Upload embedded file" box where you can upload multiple pictures to a message.

This is the cleanest, simplest and best way to handle the remaining profile issues: Sign up again. Most of the profiles were outdated anyway, some people aren't even with us anymore.

That's about it. I'll be off duty for the next day or so, but checking in, so if you have any questions or problems, just let me know. Meanwhile Wiley, Bill and Dan are here to help. Just ping the SPAM PATROL to get our attention.

Thanks for being part of our woodworking community. If you're not yet a member, now's the time to join us. Remember, WoodCentral is the sum total of what we make it. Welcome aboard!

Ellis Walentine, Host

REMEMBER, you don't need a profile to post or read messages, but you do need one if you want to avail yourself of the advantages of our new boards.


Re: FYI Profiles

#2

Are firewalls the problem??

Ed Moore in SW VA

>I am one of the folks with whom Ellis has had to spend far too much time. We have my profile in place now, but sometimes when I open WoodCentral I am not recognized. I then check my cookies and one of them no longer has my info embedded in it. It did when things were going good and WC did recognize me.

I turned off my Computer Associates Personal Firewall yesterday and things went well. CAPF turned itself back on when I booted up this morning and when I opened WC I wasn't recognized. This is easy to correct by resetting my preferences, which I have done. But I was so angry at CAPF that I decided to uninstall it. I rebooted and then opened WC and set my preferences. I am hoping that this will eliminate the cookie problem. When I am not recognized I examine the cookie and my info is not embedded as it usually is. So, some gremlin is eating my cookie!! And the cookie doesn't have chocolate chips!! I just checked and since I set my preferences and I am now recognized, the correct cookie is there. ;)

I was prepared to uninstall the entire Computer Associates security program, but it allowed me to simply kill the firewall protection. I sure hope that this eliminates the cookie gremlin.

Respect Ellis, and the bandsaw,

Ed

Re: FYI Profiles

#3

Re: Are firewalls the problem??

Carole Valentine

>Ed, I don't have that software installed, but there is usually a section where you can allow, or make exceptions, for cookies, etc. from specific sites. You probably already looked for that, but just in case....

Re: FYI Profiles

#4

thanks, and suggestions?

John K Jordan

>Looks like it worked this time! Got my profile back.

There's a lot to like about this new forum. (except those little yellow things :| :O >( don't do much for me )

When is it time to offer functional suggestions?

Re: FYI Profiles

#5

Are firewalls the problem??  YES!!

Ed Moore in SW VA

>It is my conclusions that they can be. I have not had any problems with WC recognizing me when I entered the messageboard all day. This is totally contrary to yesterday when I had the Computer Associates Personal Firewall installed. :b :b

I sure hope that this continues.

Respect the bandsaw,

Ed

Re: FYI Profiles

#6

Brad Vietje

Re: FYI  Profiles (Help Still Needed)

Brad Vietje

>UM, Ellis??

I went through you recent instructions, and I may be thick, but I don't follow... Is it possible that there's a typo in your instructions? You wrote:

3. Click "My Profile" in the navigation bar

4. Fill Out a Profile, but don't type a password in the password box.

When I do this, the only boxes available are Name and Password, and no place to type an e-mail address...? Did you mean that we should go to Set Preferences, and input e-mail and viewing options there, an then go to My Profile?

I also have Firefox set to clear browsing history when I close the browser, but I did not check the cookies box, so it should delete browsing history but not the cookies -- this could be part of the problem.

When I enter new preferences, it did remember me, and I was able to see the smiley faces, and the custom options, but now I return and we're back to square one, and I'd like to reset the profile and preferences once and save them. Something's still fishy, as I can see the emoticons when looking at the edit screen after clicking on Preview, but not when writing the original text. It's also giving me a remembered password for posting this reply (?)

Can you tell me what I'm doing wrong?

Thank you kindly,

Brad Vietje

Newbury, VT

Re: FYI Profiles

#7

Brad Vietje

Re: FYI  Profiles (Help Still Needed)

Brad Vietje

>Hmmmm.... and as a test I decided to look at my options when replying to my own recent post -- and all the custom options are there ( :\ :| ). Now, let me look at my preferences....

... and my old info is still in there. Hmmm... I need to delete everything somehow. Maybe I have multiple profiles stored (?)

Still confused (but hanging in there),

Brad

Re: FYI Profiles

#8

Brad Vietje

All Seems OK Now, After Deleing Cookies Again. 

Brad Vietje