short video of my latest project
AndiWolfe
>I've been working on a large hollow form, carved into maple leaves. I usually just show pics, but here's a 54 sec video showing the clean-up on the interior leaf surfaces.
Knowledge You Can Build On — Est. 1998
short video of my latest project
AndiWolfe
>I've been working on a large hollow form, carved into maple leaves. I usually just show pics, but here's a 54 sec video showing the clean-up on the interior leaf surfaces.
See what you did-JKJ? ;-)
Steven Antonucci
>Now everyone is posting videos... 
Andi- I assume that 54s is one of a couple thousand 54s sessions in order to complete the vessel. I can't even sand a flat surface for 54s without losing my mind. I don't know how you do it...
steve
Re: See what you did-JKJ? ;-)
AndiWolfe
>I find this work quite restful
That is, if you ignore the moments of sheer terror.
I already have countless hours in this piece and countless more to go. The challenges for the interior leaf surfaces were much more than I had anticipated - even for my relatively small hands. Now the trick is to carve the exterior surfaces without breaking the piece or going through the wall. Yay - a whole new set of challenges to engage my mind.
Re: See what you did-JKJ? ;-)
Hal Taylor
>I guess you really don't want to "pierce" do you? Speaking of time, when do you have time to practice the dulcimer?
Re: See what you did-JKJ? ;-) *LINK*
AndiWolfe
>Hal - the piercing on this piece was at the beginning as I was removing negative space. The wall thickness at that time was more than an inch. It took a lot of beefy drill bits to get through that stage - plus about 15 hours of time. Right now I'm working on the exterior leaf surfaces. That's a bit easier than the interior surfaces, but I'm still spending 2+ hours per leaf to do the final carving. Very slow going, and I need to stay focused... Little piercings at this stage of the game appear as insect bites out of the leaf - adds to the naturalness of the piece, so I don't mind too much, but I do try to avoid it where possible.
Music practice is every Tuesday night with the band. When there's a gig coming up on the schedule, the wood shop sits idle while I hone my music skills. One has to find a balance in life.
BTW - there's a series of progress pics on my facebook page.
Work in Progress