Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Dimensions for Woodfast knockout bar

Posts

Dimensions for Woodfast knockout bar

#1

Dimensions for Woodfast knockout bar

David Walser

>Can any of you share with me the dimensions for the knockout bar on the old Woodfast lathes? I lent my lathe to our local club for private classes a few months ago and it came back without the knockout bar. :\ I'm finally getting around to making myself a replacement. I know I can figure out the dimensions on my own, but I'd prefer something that was close to the original.

Re: Dimensions for Woodfast knockout bar

#2

Re: Dimensions for Woodfast knockout bar

JamieD

>The original for my Woodfast 409 measures 7/16" but I'm sure you could get by with a 3/8" rod which might be more readily available.

Re: Dimensions for Woodfast knockout bar

#3

Re: Dimensions for Woodfast knockout bar

Mike Foster

>The knockout bar for my Woodfast is 3/8". I have a couple of 3/8 steel rods laying around the shop so that I always have one close at hand.

Re: Dimensions for Woodfast knockout bar

#4

Re: Dimensions for Woodfast knockout bar

Darryl Schilling

>Knock out rod for my 408H is 12 inches long and 1/2 in dia.