Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Thread chaser brand recommendations?

Posts

Thread chaser brand recommendations?

#1

Thread chaser brand recommendations?

Dave Staeheli------WebKitFormBoundaryRHbv7yP7o3x+b

>I want to get more into thread chasing, and after recently attending an Allen Beatty demo, am even more so. After studying the catalogs and internet offerings, I'm mystified as to which brand might be best. Allen discribed several features of his own thread chasers which made them the best, but the pictures of the Crown, Sorby and Henry Taylor chasers did not exactly look like his. For instance, Allen states that the chaser should start with a whole tooth and not a half tooth, which makes sense to me, but I'm unable to discern from a picture that this is the case in the offerings.

It would be more useful to me if comments can compare brands instead of just saying, "I've got this brand and it works for me".

Re: Thread chaser brand recommendations?

#2

Re: Thread chaser brand recommendations?

Greg Haugen

>Dave,

A couple of difference, most chasers are ground straight up and down, non-spiral. Sorby's, however, are ground in a spiral. Those who use the others, say it doesn't matter, those that use Sorby's say that it matters. :-)) Sorby does make the best, largest "relief" tool, the scraper that's notched to make a relief at the end of the female threads. The other options are rather "dinky". :-) It's also easy to make your own "relief" tool.

A couple of the best "chasers" in America are Anthony Harris (acmewoodturning.com) and Mark St. Leger (markstleger.com). Anthony uses Sorby often and chases threads on everything from wood to nuts and even fruit/vegetables. Mark makes and sells his own, double ended in a handle. Contact Mark for more details.

If you decide on Sorby's, Hartville Tool has the best prices on them, by far and offers free shipping on $100 or more orders. Mark St. Leger also offers a very nice option that comes sharpened and ready to use.

Not much help, I know.

Re: Thread chaser brand recommendations?

#3

Thread chaser - Mark St Leger *LINK*

Ed Moore in SW VA

>I think that the double-ended chasers produced by Mark St Leger are an optimal choice. You need just one tool, which comes in a nice handle. There is never a danger of putting 16 tpi on the male and 18 tpi on the female if you have that one tool. It's easy to pick up the wrong second chaser when you have more than one pair. They are also very well made. I have two of Mark's chasers and they work very well.

Recommended,

Ed


Mark St Leger

Re: Thread chaser brand recommendations?

#4

Re: Thread chaser - Mark St Leger

John Lucas

>I made my own and they look like Mark's. It just looked like a good way to go. I have Sorby set and then some offbrand who knows where they came from set. I have about the same success with all of them so far. Maybe I'm just too new at this technique and don't know enough to tell the difference yet. I did find out that making the angle of the thread too steep makes the tool travel too fast and is hard to control. All of mine have a slight angle to the threads so I can't speak on how hard or easy it is to use a chaser with no angle at all.

Re: Thread chaser brand recommendations?

#5

Boxwood

Rick_Allen

>Get some dry boxwood. That wood makes the qualities of the tools unimportant. You will succeed in chasing threads with boxwood. That success will go a long way to enabling you to chase threads in other woods

Re: Thread chaser brand recommendations?

#6

Re: Thread chaser brand recommendations?

HeatherA in AK

>I took a couple of classes, one by Peter Herud. He has everyone "tune up " their chases no matter what brand. This included relieving much of the top edge of the tooth area so that it was thinner, kinda like a negative rake scraper. We also worked a long time on the bottom edge and corners of the whole tool so it was not sharp but very slightly radiused corners so they did not catch on the tool rest. In another class we also did our beginning practice cuts in 3" PVC pipe sections. It actually threads nicely and is cheap, We mounted the sections is 4jaw chucks. I got the sorby chasers and vaguely remember wishing I had purchased the crown based on Peter's critique of the different brands but cannot remember exactly what he preferred. Good Luck! I also like how Peter uses an epoxy poured into a ring so that you can put threads on wood that you would otherwise not be able to chase threads on. This is described in Bill Bowers book on thread chasing boxes.

Heather

Re: Thread chaser brand recommendations?

#7

Katherine Kowalski

Re: Thread chaser brand recommendations?

Katherine Kowalski

>Hi Dave,

I also took Alan's class on thread chasing -- he suggested to grind off the first half-tooth if needed.

(This modification could be made on any brand you decide to purchase.)

Katherine

Re: Thread chaser brand recommendations?

#8

Re: Thread chaser brand recommendations?

gtwilkins

>Dave,

A mate of mine swears by these:

http://www.toolsforworkingwood.com/Merchant/merchant.mvc?Screen=PROD&Store_Code=toolshop&Product_Code=MS-THRDCH&Category_Code=CRI

He does a lot of chasing and has several different brands of tools but the Iles are his go to chasers.

Trevor