Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Belt for "original" Delta Midi-lathe (LA200)

Posts

Belt for "original" Delta Midi-lathe (LA200)

#1

Rob Wallace

Belt for "original" Delta Midi-lathe (LA200)

Rob Wallace

>Can anyone confirm that the correct Poly-V belt for the "original" Delta Midi-lathe (the LA200) is a 240J (24" circumference) with three ribs? [The Delta owners manual is of no help here, only supplying a Delta part number, not the standard belt designation.] I need to confirm this with a belt supplier for a bulk order of replacement/spare belts we are putting through for our woodturners group. I had one of these Delta Midi lathes a few years ago, but never checked the belt specs. If anyone can confirm this, it would be much appreciated. (BTW the 10" Jet mini (JWL-1014) uses the 240J-3 belt; the 12" JWL-1220 uses a 260J-3 if anyone is interested.)

Thanks!

Rob Wallace

Re: Belt for "original" Delta Midi-lathe (LA200)

#2

Leo Van Der Loo

Re: Belt for "original" Delta Midi-lathe (LA200)

Leo Van Der Loo

>The 240 J3 is too short for the Delta Midi lathe, it needs a 25.5" long belt, and yes it is a J3

I got mine from beltforanything, nice people to deal with and very helpful, good prices also.

Have fun and take care

Leo Van Der Loo