Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

At the beach completed

Posts

At the beach completed

#1

At the beach completed

Tery Scott

>Well all finished all but for a name

This is the piece I posted that I was working on over the Xmas Hoilidays

Dam if the texture didn�t take ages to complete every time I thought I had finished there was another hour hunting for missed bits.

I could only do about a half an hour in a stretch before going dotty

210mm h 14mm dia

I fully appreciate the time Ed takes to pierce all these holes and also fully understand why he keeps the size down.

I used a 3mm cup cutter ( 6 of them ) to place on the raised dimples and the finish is my new friend Rust that Richard R and Terry baker put me onto when we were at a Collab in Australia recently thanks guys .

The inspiration came from the beach at our holiday home were the rocks are covered in Millions of miniature mussels, like a carpet and the worm holes in the rock faces

Comments welcome


img

Re: At the beach completed

#2

Re: At the beach completed

Tery Scott

>Back view

Well all finished all but for a name

This is the piece I posted that I was working on over the Xmas Hoilidays

Dam if the texture didn�t take ages to complete every time I thought I had finished there was another hour hunting for missed bits.

I could only do about a half an hour in a stretch before going dotty

210mm h 14mm dia

I fully appreciate the time Ed takes to pierce all these holes and also fully understand why he keeps the size down.

I used a 3mm cup cutter ( 6 of them ) to place on the raised dimples and the finish is my new friend Rust that Richard R and Terry baker put me onto when we were at a Collab in Australia recently thanks guys .

The inspiration came from the beach at our holiday home were the rocks are covered in Millions of miniature mussels, like a carpet and the worm holes in the rock faces

Comments welcome


img

Re: At the beach completed

#3

Steven Antonucci

Very nice...

steve antonucci

>If you are using an iron based paint, you can get it to rust with a solution of vinegar and table salt. Not sure how much the solution you are using costs, but I make mine for about $.25.

S


img

Re: At the beach completed

#4

Re: Very nice...

Joe Herrmann

>Steve and Terry:

Could you elaborate a bit more on the "rust" painting technique? What type of paint is it and where do you get it? Is the process anything more elaborate than painting it on or or does it entail a bit more to get the look?

I'm also interested in learning more about the green copper (verdigris) process as well. Can either of you help out with that?

Thanks,

Joe

Re: At the beach completed

#5

both vessels are amazing

bob davis5098

>

Re: At the beach completed

#6

Steven Antonucci

What I do and where I source

steve antonucci

>I use the metal paints from www.sculptnouveau.com. I occassionally buy their patinas, but usually make my own.

Process for me is as simple as paint and spray. I usually put a heavy coat on, and then spray my patina with a small spray bottle. I use basic chemistry to form the oxides.

Copper will get a blue/green with ammonia and salt. It's more minty green with vinegar and salt. Both mixtures cause iron to rust. If you want to get their patinas, they run about $15 a pint, Mine come from my kitchen.

This one is iron. I have no idea how I got the blue green, but it's pretty cool...

S


img