Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Finial Forest- anybody here playing with....

Posts

Finial Forest- anybody here playing with....

#1

Finial Forest- anybody here playing with....

JamieD

>...finial variations these COLD days? I usually keep a stash handy for quick fitting to vessel projects, and make them in batches because they're "entertaining!" Don't know what I'll do with the multi-axis turned specimens, and also experimenting with finishes other than shiny black, meaning woods other than expensive ebony and blackwood..


img

Re: Finial Forest- anybody here playing with....

#2

Re:Here are some color variations, and.....

JamieD

>..the metallics are made using Rub-n-Buf pastes applied while spinning.


img

Re: Finial Forest- anybody here playing with....

#3

Re:Here are some color variations, and.....

John Cotten

>Great work as always Jamie. Stay warm. It sure is cold here in Harrodsburg.

Re: Finial Forest- anybody here playing with....

#4

Re: Finial Forest- anybody here playing with....

Texian

>No, but could/should be doing that while waiting for glue to dry. Mine are not awful, more like mediocre, and need more practice. I like the multi (2?) axis on the far right of your picture. Many pieces might be better served by a natural wood finial rather than the ubiquitous black. Some of the metallics could work on the green and rust finish pieces. Just some thoughts on a cold evening here too.

Re: Finial Forest- anybody here playing with....

#5

Steve Kubien

Re: Finial Forest- anybody here playing with....

Steve Kubien

>No Jamie, I'm turning finials en masse but I think that is a fantastic idea! Oh ya, I will be setting aside time to do this.

Steve

Re: Finial Forest- anybody here playing with....

#6

Very cool Jamie!!

Dave Peebles Lyons, Ohio!

>

Re: Finial Forest- anybody here playing with....

#7

Re: Finial Forest- anybody here playing with....

Cyril Griesbach

>Very nice finials, Jamie, and I like the color variations as well as the off center designs. I usually turn my finials into firewood or should I say fire starters.

Re: Finial Forest- anybody here playing with....

#8

Re:Here are some color variations, and.....

Carole Valentine

>Jamie, what are you using for the gold, copper and silver finishes? I have tried the Rub 'n Buff stuff but never was satisfied with the results.

Re: Finial Forest- anybody here playing with....

#9

Steven Antonucci

Promise in this idea

steve antonucci

>If I was messing with this stuff, I'd make all of my tool handles look like that. Nice effect.

s

Re: Finial Forest- anybody here playing with....

#10

Re:Here are some color variations, and.....

doug williams

>Nice color combinations, adds a different flair to different possibilitys of other work. Thanks for posting, and for the invitation. Where is this compound available. Doug

Re: Finial Forest- anybody here playing with....

#11

Re:Here are some color variations, and.....

GalenV in Iowa

>Jamie

I bought the gold leaf Rub-N-Buff at Hobby Lobby to apply to some turned Christmas ornaments. I tried to apply while the piece was turning but ended up with applying stationary with a very fine soft brush and then when dry buff with a tissue.

Did you apply while turning at a high speed or low?

When I did it seemed to pull some spots back to bare wood. Touch not right or speed.

I had better luck with a coat of spray lacquer sanding sealer and very fine 600 grit sanding first. Did you apply any precoats first?

Wish I could produce more detailed finial but learning SLOOOWLY.

Only multiaxis I did was when I got a catch!

Yours are great.

Galen

Re: Finial Forest- anybody here playing with....

#12

Re:Carole- I found that application of ....

Jamie Donaldson

>...Rub'nBuff with a paper towel at slow speeds is the trick, and faster speeds cause it to flake off. The surfaces have to be well sanded but w/o any sealer for the stuff to stick best.

Re: Finial Forest- anybody here playing with....

#13

Re:Doug- I generally buy Rub'nBuff...

Jamie Donaldson

>..at Michaels art supply type stores, and it comes as a paste in small tubes, and a wide variety of colors. I used to use it primarily for antique picture/painting frame restoration since it has a nice range of golds.

Re: Finial Forest- anybody here playing with....

#14

Re:Here are some color variations, and.....

keith zimmerman, Normal, IL

>I really like these variations Jamie. They give a lot of food for thought for different applications of color to a piece. I've been thinking about something like this. It is great to see it in application and to know that it is possible and looks good.

Thanks for sharing.

keithz

Re: Finial Forest- anybody here playing with....

#15

Keith Tompkins

Re: Finial Forest- anybody here playing with....

Keith Tompkins

>Nice work Jamie! Just curious...how long does it take you to turn a finial, on average?

Re: Finial Forest- anybody here playing with....

#16

Re: Keith- actual turning time is maybe.....

JamieD

>...10 min. but you know that all the other parts of the process add much more to that total.

Re: Finial Forest- anybody here playing with....

#17

Jamie, these look terrific.............

Ruth Niles

>They look like an art display just the way they are! Very attractive, gives me inspiration.