Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Chainsaw update

Posts

Chainsaw update

#1

Chainsaw update

Marc Phillips

>I had 2 things going wrong at once... so that was messing up the attempts to figure this out....

I took the plug from the Stihl and put it into an excellent running saw I have... and it wouldn't run.

.... so, put a new plug into the Stihl, put some gas into the plug hole, and it fired up and ran for a few seconds. Did it again, and it ran again.

Removed the gas cap, no go.

Removed the gas filter inside the fuel tank, no go.

So... gotta do the carb...

Thanks again all... you were great! ... and yeah, I am gonna give him $30 for it... hopefully it will run once I get the fuel problem straightened out.

Re: Chainsaw update

#2

Re: Chainsaw update

Texian

>Nice work Marc and good luck with the carb. Those teeny 2-stroke carbs are like watches.

Re: Chainsaw update

#3

Keith Tompkins

Re: Chainsaw update

Keith Tompkins

>Texian, they're nuthin' compared with the four carbs on my Honda 750! :)

Re: Chainsaw update

#4

Re: Chainsaw update

Dave Moore

>Splendid!

If you're comfortable rebuilding the carb yourself, and they're not so tough really, then that's the way to go.

Some places offer rebuilds with a guarantee for less money than new, and they take your old one as a core. Mostly that's for the bigger pro models however, where the logger really doesn't have time to screw around with it himself. Or herself nowadays, for that matter.

Might be worth scouting around though, if you're not into yourself.

Re: Chainsaw update

#5

Keith Tompkins

Re: Chainsaw update

Keith Tompkins

>Marc, all kidding aside, the carb is a piece of cake....there is a screen in the carb body at the fuel inlet...it will be so clogged with fine sediment from the tank that you won't even notice there is a screen there at first. Clean with carb cleaner and compressed air if you have it. I've taken apart quite a few, they've always been clogged there.

Re: Chainsaw update

#6

Re: Chainsaw update

Gary Evans--Tallassee TN

>Looks like a good carburetor cleaning will straighten it out for you Marc. Buy a can of spray carb cleaner at the auto parts store and make sure that you can spray through all the passages in the carb body once you get it apart.

It's funny how a bad plug can still show some spark until you get it under compression, then not spark at all or only very weakly. That's why it's always a good idea to keep an extra spark plug around for your two stroke engines. It's like a tune-up in a box.

One thing about it, when you get this thing up and running you won't be able to say you can't fix two stroke engines. You'll be telling your friends, "It's not rocket science." 8^]

Good luck with it,

Gary

Re: Chainsaw update

#7

Keith Tompkins

Re: Chainsaw update

Keith Tompkins

>Like water, electricity will take the path of least resistance...you're asking it to jump an air gap to ground, while it's much easier to follow a small carbon-track along the insulator to ground.

Re: Chainsaw update

#8

Re: Chainsaw update

Texian

>Ever had one of the slides hang open (after working on them) and fire it up?

Re: Chainsaw update

#9

Keith Tompkins

Re: Chainsaw update

Keith Tompkins

>NO! NO! But I can imagine the mad dash for the kill switch! That wouldn't be good...hey, why do you ask??!! :)