Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Reclaimed Maple Bowl

Posts

Reclaimed Maple Bowl

#1

Reclaimed Maple Bowl

Jeff Rich

>Hello everyone!

I thought it was about time I posted some of my work after admiring so many turners here at WoodCentral.

Like many, I am often too critical of my own work and do nothing wit it after I finish a piece.

I have a room full!

This is a maple bowl from a neighbors now defunct tree trimming services (health reasons).

This little guy has been drying for about 2 years, approx. 10 inches in diameter, 3 inches in height.

I turn most of my bowls for utilitrian use so this is sanded to 180.

Comments are welcome.


img

Re: Reclaimed Maple Bowl

#2

Brad Vietje

Re: Reclaimed Maple Bowl

Brad Vietje

>Nice treatment of difficult wood, Jeff.

Spalted wood can be a lot more difficult to work with, since there are harder and softer areas.

Finish?

The photo doesn't show the profile very well, so if you have a photo from a bit lower down, I'd like to see it. If this is your first WC post, you're off to a great start!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Reclaimed Maple Bowl

#3

Looks mighty fine to me. Good job

john lucas

>

Re: Reclaimed Maple Bowl

#4

Re: Reclaimed Maple Bowl

Jeff Rich

>Here is a profile view.


img

Re: Reclaimed Maple Bowl

#5

Nicely done, Jeff.

Cyril Griesbach

>

Re: Reclaimed Maple Bowl

#6

Re: Reclaimed Maple Bowl

Jeff Rich

>Thanks for the good comments!

I have been turning seriously for about 10 years.

My GF Cheri about 5 years.

She is the champion of making jam or drive chucks for just about all of her jars and birdhouses.

Almost all of the wood we use comes from reclaimed trees, taken down by storms or the city for various reasons. I will try to post a few pics of the cookie jars and goblets soon.