Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Pendant jig

Posts

Pendant jig

#1

Pendant jig

john lucas

>Thanks to Ed Davidson for posting the jig made by Richard Joyner. I had to repair my Leitz ball head for my tripod and to do it I had to correct a problem of some slop on my metal lathe. I built the part to correct the slop and then fixed the brocken part on my ball head.

After seeing the pendant making jig I thought that would be a good project to learn some new skills on the Smithy. If I remember correctly I think he said he sold these for $45. Based on how long it took me that is one heck of a bargain. Of course I'm sure Richard is a better machinist than I am. Still I had fun making it and learned some valuable skills.

Now I've got to get time to use it.


img

Re: Pendant jig

#2

Re: Pendant jig

Dennis Barley

>I made a less sophisticated version of the pendant jig by gluing together several layers of an old plastic cutting board, turning the blank round, and drilling and tapping several holes. The material taps very easily. I found one of the advantages to having a drillable surface is that you can turn a small tenon in the sacrificial wood spacer block to center it in the center of the face of the jig and to provide a more solid anchoring method. The thing works pretty well, although I'm sure it won't hold up nearly as well as John's and Mr. Joyner's.

Re: Pendant jig

#3

Re: Pendant jig

Bill Crommett

>John: A good looking project. Now if you could give us a ten minute tutorial so I don't go to sleep waiting for the next bit of explanation.

Re: Pendant jig

#4

Here's the tutorial.  *LINK*

john lucas

>


http://yoyospin.com/videos/pendant_1.wmv

Re: Pendant jig

#5

Re: Pendant jig

Jerry Lear

>Where can you buy this jig. Thanks

Re: Pendant jig

#6

Re: Pendant jig

john lucas

>It's at the very end of the video. I went there and didn't see the Pendant jig. It says you can e-mail him at the link below.

Re: Pendant jig

#7

Ken Vaughan

Re: Pendant jig

Ken Vaughan

>Nice john -

I think Richard has a CNC machinist making these, and gcode repeats are easy.

Think about drilling and countersinking for 4 screws in the index plate so one can make it function as a face plate for a waste block. I think 4 screws beat tape 8 days a week.

Have fun -

Re: Pendant jig

#8

Re: Pendant jig

john lucas

>Good idea. I think I'll do that. I don't think it's beefy enough for anything large and double stick tape will probably hold anything I would turn. However it would be really easy to drill and counter sink for screw then that option would be there.

Re: Pendant jig

#9

Re: Here's the tutorial.

Don Weygandt

>John Can you explain how 2nd plate works ? The one with all the screws

I can't figure from viedo what its purpose is Thank You

Re: Pendant jig

#10

Re: Here's the tutorial.

Darryl

>John, when you move the turned block to another rear hole it may not put the center where you would like your gouge to cut. So what I do is to loosen the screws and rotate the piece so that the center of cut is where I want it. I sometimes hold a pencil on the turned material and rotate it. If the partial cutout ring is not where I want it I rotate until the pencil mark is at the correct place. Hard to explain but easy when you have the item mounted on the plate.

In effect the rotating outer ring allows you to put the rotating center where you want it.

Re: Pendant jig

#11

oops Don not John

Darryl

>

Re: Pendant jig

#12

Re: Pendant jig

Darryl

>Joyner goes by the name of sailing_away on the International Association of Pen Turners web site. It runs about $49.00 shipped. Can't remember his exact email but you can find it with some digging. I think he is also at creative design web site

Re: Pendant jig

#13

Richard Joyner's email

Darryl

>is

richard@creativependesign.com

Re: Pendant jig

#14

Ken Vaughan

Re: Pendant jig/Shawl pin jig

Ken Vaughan

>I thinks the screws are better because I make shawl pins (a ring about 2 to 2 1/2 inches in diameter with an offset hole about 1 to 1 1/4 inchs -- my wife weaves, spins, knits and her shawls get a shawl pin (the ring has shawl pushed up from behind and a pin is trun through to hold the shawl. Will try for photos when she gets back from current trip.

Re: Pendant jig

#15

Re: Pendant jig Tutorial PART 2 *LINK*

Rich Pearson in Mill Creek, WA

>There is a part 2 for the pendant jig tutorial video.It demonstrates what the second indexed plate does and how it operates. Very slick thinking!

You can find it at :

http://yoyospin.com/videos/pendant_2.wmv

I just replaced the "1" in the original URL with a "2" (no quotes in URL's)


Tutorial Part 2

Re: Pendant jig

#16

Re: Here's the tutorial.

john lucas

>Thanks Daryl I haven't used it yet but have done enough off center turning that I could see the advantage. It will be fun using it. It might be awhile because I have at least 3 other projects to finish and have 3 classes coming up that I have to prepare for.

Re: Pendant jig

#17

Re: Pendant jig Tutorial PART 2

john lucas

>Thanks Rich. I always use a pencil to mark the piece before turning to make sure that any offset is where I want it to be. I like the idea of marking the tool rest to aid in this. It gave me an idea on making a micro adjuster for the tool rest banjo. I'll have to work on that this week. If I get it to work I'll post it.

Re: Pendant jig

#18

Brad Vietje

Can't Open Video -- what does it DO?

Brad Vietje

>

Re: Pendant jig

#19

It makes you want one! : )

Ruth Niles

>Hi Brad, I can't help you with opening the video, sorry. Ed Davidson demoes using the pendant jig/plate and makes you want to buy one. I ordered mine about 5 minutes after watching the video.

: )

Re: Pendant jig

#20

Brad Vietje

OK, but what would I use it for?

Brad Vietje

>I went to Ed's site and he has some spectacular yo-yo's that look like a Rose Engine was used to create the patterns. My best guess at this point is that Ed uses a jig to index the cutters to produce this pattern. Is this done with a router? a Dremel/Foredam type tool?

I'll try the video link again. Wouldn't open in the previous attempts.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Pendant jig

#21

Re: OK, but what would I use it for? *LINK*

Brent Smith in Montreal

>Brad, here's a link to a pic tutorial on the Backer Plate.


Pic Tutorial

Re: Pendant jig

#22

Re: OK, but what would I use it for?

Jim H

>His yoyo�s are done on a Rose Engine. The pendent jig would be used for offset flat work like jewelry or inserts for other turnings like box lids.