Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

New Year, New House, New Shop

Posts

New Year, New House, New Shop

#1

Brad Vietje

New Year, New House, New Shop

Brad Vietje

>I'm not one for making long lists of New Year's resolutions that I can't keep. This year we're concentrating on one big issue -- getting into the new house. The result is that I will get a new shop -- actually my first shop, and my first-ever heated workspace (!!!!!!), as the house we're living in will become the new shop building.

The new house is well under way -- a straw bale house with reclaimed post & beam timber frame from a 150-year-old house. Details at my straw bale house blog, found here http://vtstrawbalehouse.blogspot.com

The shop will be set up for woodturning and teaching, and will be the subject of a future post. Its a funky old farm building -- originally built as a slaughterhouse about 1895, and still has the original crane built into the structure. The crane is a 12' long round horizontal post with a 9' diameter pulley at one end, suspended between the two main roof support posts. I think I posted a photo of it about 4 years ago, but I can't find it now. The attached photo shows part of the inside of the straw bale house before interior plaster, with the future shop in the background.

I hope we can accomplish this feat at last. I hope all here at WoodCentral can meet their biggest challenge in the year ahead with success!

Clear skies, Safe spinning, and Happy New Year,

Brad Vietje

Newbury, VT


img

Re: New Year, New House, New Shop

#2

Brad Vietje

Found It: Here's the Crane

Brad Vietje

>This is quite an unusual artifact... Ignore the ceiling fan, which was added in 1970, when the place was converted to a house.

The 10" diameter horizontal post has a hole bored through it at a right angle, and the rope is knotted at the end, then wrapped around the shaft. In its former life lifting dead animals for butchering (a bit gruesome, yes...) there was a big meat hook on that rope. I think I'll look for a scissor-type log grabber of sorts, as its new job will be to lift heavy chunks of wood up to the lathe spindle.

The other rope is a spliced loop that runs through the pulley, which is knotted at the bottom for now.

Currently we sleep in the loft space behind the wheel -- creepy, no?


img

Re: New Year, New House, New Shop

#3

Steve Kubien

Creepy, yes but...

Steve Kubien

>...still bloody cool (no pun intended).