Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Projects in various phases

Posts

Projects in various phases

#1

Projects in various phases

john lucas

>This is how it goes in my shop. I always have a bunch of projects going at once. I have to wait for glue to dry or I'm finishing and can't carve, etc. I just proceed with one project until I have to stop and then do a few more steps on one of the others.

On the left is a bowl I'm working on. I friend gave me this chuck of maple, it had a huge chunk torn out of the middle almost to the bottom of the wood. I centered glue block on the back and then turned away wood until I got rid of as much of the tear out as possible. There was still a small bark inclusion in the bottom so I filled it with black epoxy. Waiting for that to dry.

In the back are 2 lamps that I'm going to spiral. Just haven't had the state of mind needed to carve them. This is a low priority project so I'll finish it when I can.

The bowl on the right is something new for me. The natural edge was weak and wanted to chip off so I carved it away. I added some colored thickened epoxy and will carve that into the kind of natural edge that I want. It will be permanent.

Then there are 3 mirrors in various stages. 2 are glue ups from a sliced Wysteria limb. The third is one I'm making from a single piece of wood. I will carve the handles on all 3.

Now I'm got to stop and work on my metal lathe to solve one of it's little problems before I can proceed with the 2 projects that require it's use.

I'm pushing as hard as I can because it's going to be very cold next week.


img