Ebony bowl
john lucas
>I had to stop to let some glue dry on my segments so I turned this bowl. It is Ebony. In doll house scale, 6" by 3 1/2". It also shows my mini tool rest that I adapted to the Powermatic 1" tool post.
Knowledge You Can Build On — Est. 1998
Ebony bowl
john lucas
>I had to stop to let some glue dry on my segments so I turned this bowl. It is Ebony. In doll house scale, 6" by 3 1/2". It also shows my mini tool rest that I adapted to the Powermatic 1" tool post.
Can you show a closeup of your cuts.....
jake Niedling
>Do you have a macro setting on the camera? I would like to see the chips coming off your micro tools (joking). I assume you are riding the bevel. LOL My eyes are getting to old to turn something that small. Nice job, John.
Jake
Re: Ebony bowl
Mike Mills
>Just the right size. My bride tells me that I need to go on a diet and that looks about right for my new ice cream dish.
Mike
Re: Can you show a closeup of your cuts.....
john lucas
>Not only was I riding the bevel I got a kick back when I didn't when turning the lip. No matter the size you still gotta follow the rules.
Well done, John
Cyril Griesbach
>
Re: Ebony bowl
GalenV in Iowa
>John
I sure hope you did not waste the ebony and used a bowl center saver.
You might get another good small bowl from it. ;>)
All I can figure is the last few turnings you have posted you must be running out of wood at years end.
Here is hoping you find bigger chunks of wood for truning in 2010!
Happy New Year
Galen
I'm gonna write off my wood inventory :)
john lucas
>I'll claim 5000 bowl blanks in stock on my IRS forms. What's an ebony bowl blank worth. $80? 5000 X 80= $400,000. Cool, I'm gonna get a refund this year.
BUT... Where's the nested set???
Brad Vietje
>John,
I'm sure you didn't just hog that puppy out, and you took the time to use your Micro-Mini McNaughton Center Saver System to carefully core out the center... Please do reveal what you made from that, too!
Emoticon would be good here...
Truly a thing of beauty, John. I know how tough it is to work real small like that. I need to use my bifocal safety glasses AND the magnifier lenses to see these little things these days. I suppose I ought to make all my minis now, before I can't even see them!
Have a great New Year, John,
Brad Vietje
Newbury, VT
My shavings are larger than that bowl....
Mike Stafford
>Sometimes I make shavings larger than that John! Lovely little bowl! Where does one get a 1/32" bowl gouge.....
Re: My shavings are larger than that bowl....
John K Jordan
>>Where does one get a 1/32" bowl gouge.....
Mike, I'd-a thunk you'd be looking for a 1/32" box scraper. And where will you find a scroll chuck to properly grip a tiny tenon?
JKJ