Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Haleigh needs help : )

Posts

Haleigh needs help : )

#1

Haleigh needs help : )

Ruth Niles

>My son, Michael, and I got my granddaughter, Haleigh, a mini lathe for Christmas. For the past 2 yrs., when they come to visit, Haleigh plays on the General and is a natural. It took a few months but I located a used mini lathe in FL and Haleigh is thrilled. I think Michael will be turning in no time, too.

The lathe came with a lot of pen blanks and kits. They did find a few videos on youtube but still have questions. Since I've never turned a pen, I'm of no help.

They live in Englewood, near Venice, FL. If there's anyone close to them that might be able to get them started, that would be wonderful.

I will be down there in 2 weeks for the FL Symposium and have registered Michael and Haleigh......... I'm excited! But I won't be going to their house and you know how much easier it is to learn with someone right there.

Thanks,


img

Re: Haleigh needs help : )

#2

Haleigh's ornament

Ruth Niles

>This is the ornament Haleigh made this past summer in my shop, on the General. She didn't hollow the ball but it's a beauty and she is very proud of it. She's 9 yrs. old. She's going to be better than me at the lathe in no time! : )

ok, I'm not too proud of her, right?!?


img

Re: Haleigh needs help : )

#3

Re: Haleigh's ornament

Sean Troy

>Thats the look of a proud turner. She sure has a lot to look forward to in the future.

Re: Haleigh needs help : )

#4

And you should be!

Carole Valentine

>I bet she is tickled to death with her very own lathe!

Re: Haleigh needs help : )

#5

Re: Haleigh's ornament

Molly Winton

>I'm of absolutely no help, since I've also never turned a pen, but just had to say how awesome this is. Puts me to shame, since my Jeanie has expressed an interest, and I've not found the time to help her....shame on me.

Go Haleigh!

Re: Haleigh needs help : )

#6

Re: Haleigh needs help : )

Stuart Johnson

>Ruth, I have a Penn States pen making DVD I would be happy to send to Haleigh. It is pretty good with the basics but is slanted to purchasing from PSI. Send me her address off line and I'll stick it in the mail.

Re: Haleigh needs help : )

#7

shame on you................ : )

Ruth Niles

>It really doesn't take a lot of time, just give her the ABC's of safety, stand behind her to adjust her hands for the first few cuts then stand back and watch a star blossom! simple and very rewarding

Michael had the lathe in the garage, put a pair of safety glasses in her stocking, she walked into the livingroom, saw the glasses, spun around to him, smiling said "I got a LATHE!" Michael said, "what makes you think that?" She pointed at the glasses and said, "You wouldn't have bought those if there wasn't a lathe here somewhere."

Re: Haleigh needs help : )

#8

BarbS

What a great grin!

BarbS

>I can tell Grandma is having fun with this. Haleigh did a terrific job. And you've found her her own lathe! Way to go!

Re: Haleigh needs help : )

#9

Re: Haleigh needs help : )

Carole Valentine

>You just saved me a search, Stuart! I was just thinking that I had that DVD around here somewhere.

Re: Haleigh needs help : )

#10

Re: Haleigh needs help : )

John K Jordan

>Wonderful! I'm sure she's sky high.

I don't turn pens often but I have made a few dozen. (Did a batch from cocobolo recently for the Woodcraft pens-for-troupes campaign) Do you have the other things needed?

- mandrel

- bushings to match the specific pen kits

- proper drill bit

- pen vise is helpful for drilling

- pen mill for cleanup/squaring ends

- press for assembly (not mandatory but sure is useful)

If you have a mandrel and bushings but not the rest, perhaps someone nearby could prepare a few blanks to get started. I heard you can buy pre-drilled blanks but I don't know for sure.

I suggest you or another adult make one yourself first so you can help with all the steps. There are many great books and videos. A course at Woodcraft for two would make this fun and easy (even my wife made a pen at such a course and she's not sure of the difference between a gouge and a chuck!)

JKJ

Re: Haleigh needs help : )

#11

whoa, John...................

Ruth Niles

>This lathe with all the accessories.....2 4-jaw chucks, all the wood, bushings, mandrels, drill bit, 2 sets of tools + ??) is her Christmas present, birthday, next Christmas and she'll be 13 before I owe her another present! : )

Re: Haleigh needs help : )

#12

BarbS

Check out Woodturning Design

BarbS

>Issue #17, Spring 2008: an article by Kelly Dunn's daughter Rachel, 12 years old! Ideal pens for 'kids' using only a long drill bit, and inserting ink refills. The article is well-photographed and easy to follow. It would be a good start for your grandaughter.

Re: Haleigh needs help : )

#13

Re: Check out Woodturning Design *LINK*

Jim H

>I had seen this a few days ago on you tube. Kids like to give away things they have made (and big kids) using the bic pen guts and only a long bit it would be inexpensive.

http://www.youtube.com/watch?v=Tp1YtLDPeqk


You tube video

Re: Haleigh needs help : )

#14

Re: Haleigh needs help : )

Matt Overton

>Bill Baumbeck's dvd is great for learning and seeing the steps for beginners

Re: Haleigh needs help : )

#15

Re: Haleigh needs help : ) Free DVD *LINK*

Dave (PacNW)

>Penn State Industries has a free Pen Making DVD. It is well done and worth the price!


Free Pen Making dvd

Re: Haleigh needs help : )

#16

Re: Haleigh needs help : )

Cyril Griesbach

>That's just wonderful, Ruth. I've got lots of pen stuff laying around and I'd be glad to send off a package. Just email me.

Cyril

Re: Haleigh needs help : )

#17

Thanks, Jim, excellent video for Haleigh.

Ruth Niles

>