Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Nova Midi Chuck Question

Posts

Nova Midi Chuck Question

#1

Nova Midi Chuck Question

GalenV in Iowa

>I'd like to have a second chuck for my Jet 1220 as with small projects I keep changing jaws from #2 to #1 spigot or jumbo.

Woodcraft has the Nova Presision Midi Chuck right now for $79.99 and free shipping. The unit also comes with two sets of jaws for 25mm and 50mm.

I have seen some pro and con comments on this chuck and I realize it has the two bars to tighten.

My current chuck is a Oneway Talon.

Would the Talon jaws fit the Nova Midi for some added use?

Buying a Talon and bushing would be nice but it is still a lot more.

Any comments before I order the Nova?

Thanks

Galen

Re: Nova Midi Chuck Question

#2

Re: Nova Midi Chuck Question

Doug Turner

>I have had a Nova chuck with Tommy bars for over 20 years and it is still going strong after some heavy use. I believe these were packaged with the Jet 1014 a couple of years ago around Christmas holidays.

Re: Nova Midi Chuck Question

#3

Dick Hines

Re: Nova Midi Chuck Question

Dick Hines

>I don't think your jaws will fit the Nova chuck. All my chucks are Nova's so I am not sure.

Re: Nova Midi Chuck Question

#4

Re: Nova Midi Chuck Question

E Tabachek

>I have both chucks. They both work well but I have not tried to interchange the jaws. Personnaly, I would stretch the dollars and buy a second Talon. In the end, you will find dealing with one brand of chuck a whole lot easier. Operating keys (tommy bars). jaw mounting screws, spindle adaptors, etc.

ET

Re: Nova Midi Chuck Question

#5

Bill Blasic

Re: Nova Midi Chuck Question

Bill Blasic

>Galen,

I have put a set of jaws from the Talon on a Nova, it works that way but not the other way - Nova does not fit the Talon. I feared all the doom and gloom about using Tommy Bars at the outset but did eventually buy a Precision Midi. I now have 5 (I couldn't pass up the current sale) and I use them 95% of the time on the Jet 1220 and the Delta 46-460. I find them fast acting and accurate in clamping and it is even easier now that I use Jamie Donaldson's golf ball trick for tightening. Teknatool has now on sale a set of four jaws made especially for the Midi and the G3 at Woodcraft. You take these two sales and you get a chuck and 6 sets of jaws for $160 that cover the gamut in your turning (but of course I hate changing jaws).

Bill

Re: Nova Midi Chuck Question

#6

Thanks all for your input.

GalenV in Iowa

>Bill

I saw the comment about using the golf ball as a way to self balance a piece. Don't play golf and there is too much white stuff on the ground to find one at the golf course now. Gee I may have to actually buy one or get a whole bag full at Tiger Woods divorce sale.

Merry Christmas

Galen

Re: Nova Midi Chuck Question

#7

Re: Thanks all for your input.

Don at Central Illinois

>If you need just a few golf balls, let me know. I'll send you some. I have more than I can lose now.

Re: Nova Midi Chuck Question

#8

Re: Thanks Don

GalenV in Iowa

>Thanks for the offer Don but I think I can hit my son up for one or two.

He just completed his work at ISU and will head to Philadelphia to work on his PhD. He should have no time for golf!

Merry Christmas

Galen