Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

setting sun

Posts

setting sun

#1

setting sun

GaryG in MD

>I don't often post my pieces because, frankly, they're pretty common, but I thought this one might be nice to show. This spalted maple chainsaw cutoff is actually a recycling reject -- I threw it in the trash bag and then got it back out. It's 6.5" x 4" x 1", and the back is all natural bark -- no evidence that it was held on a lathe (I positioned it between three rubber buttons on my jumbo jaws and duct taped it to the jaws). Finished with a couple coats of rattle-can clear acrylic spray (to preserve the light color) rubbed out to Abralon 1000 -- I didn't want it very shiny. I call it "setting sun" because to me it looks like the sun setting over water, with a couple of refraction blobs above it. Save those bits 'n' pieces, Gary


img

Re: setting sun

#2

Dick Hines

Re: setting sun

Dick Hines

>Very nice Gary. I like the natural edges. Can you post a picture of the bottom?

Re: setting sun

#3

Jesper, Denmark

Re: setting sun

Jesper, Denmark

>It is always nice to see something, where the beauty in the piece has been recognized - end the least amount of alteration done to highlight it.

Re: setting sun

#4

Re: setting sun

John Lucas

>Excellent. Your learning to see and discover. That's what it's all about. When you find something exciting like this in a piece of wood and have the skills to reveal it, you've done something wonderful. Feels good doesn't it. That's why we all get hooked on this hobby. It's like playing the lottery. You spend a rediculous amount of money trying to win and the little victories just make you dig further.

Re: setting sun

#5

Re: Setting sun

Ray Carson - Lawrenceville, NJ

>Good eye Gary. I love spalted wood. I think your "bowl" is very functional and at the same time a piece of art. Very nice.

You picked a good name too.

Ray

Re: setting sun

#6

Re: Very nicely conceived and....

Jamie Donaldson

>....executed piece Gary- you have used almost all of the available material, rather than another boring brown and round! (;-D)

Re: setting sun

#7

Re: setting sun

charlie belden

>Beauty surrounds us - but you may have to really look - or do a little digging - or turning - to find it. This is another example of that truth.

Thanks for the reminder.

Re: setting sun

#8

glad you all liked it...

GaryG in MD

>Thanks to you all for the very positive comments. I'm pleased that you like it as much as I do.

Dick -- here's the shot of the bottom you asked for, and, following, a side shot to show the depth.

Jesper -- I have to admit using a sanding disc (on the lathe) to define the shape and edges of this piece as much as I subsequently used the gouge to add the bowl.

John -- Yes, it does feel good to find, and recognize, something like this.

Ray -- I love spalting, and you're right, it IS functional -- I think my grandchildren may find a few M&Ms in it next time they come down.

Jamie -- thanks, I'm glad it caught your attention. (I even got a good gray background!)

Charlie -- it doesn't show very well in the photos, but there was some design work here too -- there are actually 7 polished facets on this little critter. I wanted some linear geometry to set off the spalt lines. They are at odd angles, very smooth, and look and feel like polished stone.


img

Re: setting sun

#9

and a side view...

GaryG in MD

>I should have also noted that this piece feels very nice in the hand because it is light, balanced, and has a nice texture contrast between the very smooth cut surfaces vs. the rough bark. The size and shape of the bowl may seem "obvious", but they are the result of a slew of drawings on a Xeroxed outline. The bowl was going to be a tad deeper, but I had to stop to save the spalted "sun" figure. I sprayed it with acrylic after every delicate gouge cut to harden the fibers and minimize the end-grain tearout in this slightly punky wood. ...Gary


img