Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Earrings

Posts

Earrings

#1

Earrings

Barry Irby

>I made these. Curly maple and tibet for the ornament ones and spalted maple and some sort of mahogany for the bird house ones.

I'm not very happy with them. Turning at this scale, 1/100" makes a big difference. Maybe the thing to do is turn a bunch of parts and then pick the best matches.

I haven't put the findings on them and may not. They may turn into tiny ornaments if I decide they don't match well enough.

Comments welcome.


img

Re: Earrings

#2

Nice work!

Tony - Memphis

>When I was in the race car parts biz, that's how one of our lifter companies handled their production. Producing parts for hydraulic lifters with the tolerances required is very difficult (we're talking very tight tolerances - in the ten thousandths). So, they made them and measured them and sorted by size. did the same things with the lifter bodies, then matched them all together.

Tony

Re: Earrings

#3

Re: Nice work!

Bill Crommett

>Barry: Don't worry about the discrepancies. Only a woodturner would be so critical of such art work. And besides who can see both ears at the same time.

Re: Earrings

#4

Thanks, I need the feed back.

Barry Irby

>I am torn about these. I have made a bunch of icicles for ornaments and thought they matched. I guess when you pair them up, not so much.

If you have not turned tibet, try some. It turns like a dream. If sanding was necessary, I started with 320. Some with 600.

Re: Earrings

#5

Re: Earrings

AndiWolfe

>Barry - after about 100 sets you'll be able to match the pairs while blindfolded and both hands tied behind your back. The small scale is, indeed, a challenge. All but one of the pairs is matched in size - pretty good effort for your first attempt at earrings.

Did you use miniature tools? I would think turning earrings would be similar to working in miniatures.

Re: Earrings

#6

Re: Earrings

Barry Irby

>Andi, Thanks

Believe it or not I did almost all the turning with an Elsworth bowl gouge. Its my go to tool for everything.

Oddly, somehow the picture really reveals the faults. If anything I think the icicles need to be better matched and much thinner, more delicate looking. (I always need to work on "delicate", I have that Engineering Brain that goes for "Sturdy".) Even what few miniature tools I made grew a little and are larger than they should be.

Re: Earrings

#7

Re: Earrings

AndiWolfe

>An Ellsworth gouge? Can't even fathom it for this scale. That would be like the Aussie who turned a goblet for me - using a hatchet blade! It was an impressive demonstration of dexterity.

Seriously, Barry - try a small skew and 1/4 inch gouge ;-) Grind most of the bevel away (forms a secondary bevel) and leave the primary bevel just at the edge of the cutting surface.

Re: Earrings

#8

More tools to buy.....

Barry Irby

>and learn to sharpen and use. Thanks, I took lessons from David at Arrowmont. Now I need lessons on the tiny tools.

I made myself a 1/4" round skew and I have a small gouge, just need to improve the sharpening.