Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

I've been doing a little turning

Posts

I've been doing a little turning

#1

I've been doing a little turning

John Lucas

>Here is a hollow vessel out of mahagony


img

Re: I've been doing a little turning

#2

another angle

John Lucas

>I made a new hollowing tool for this size. I used to just drill them so it looked hollow. This one is actually hollowed. Wall thickness is unknown because Keith hasn't made a thickness gauge this small. The biggest problem is getting shavings out. You have to make yourself take very little bites or the shavings are too large to get back out of the hole.


img

Re: I've been doing a little turning

#3

Aw C'mon, . . .

Doc Green

>John, tell use where you get those big pennies.

:) ~Doc

Re: I've been doing a little turning

#4

Dick Hines

Re: another angle

Dick Hines

>John you can make a gauge out of two pieces of coat hanger. I use them all the time when I do ball ornaments.

Re: I've been doing a little turning

#5

Re: I've been doing a little turning

Tery Scott

>I would have lost money on picking this as mahogany

Nice work John

Re: I've been doing a little turning

#6

Re: Coat hanger wire too thick for.....

Jamie Donaldson

>...this scale work Dick, so use a paper clip! John, you are going to ruin your eyesight working on this scale too often- do you have your camera repair magnifiers on? (;-D)

Re: I've been doing a little turning

#7

Re: Coat hanger wire too thick for.....

John Lucas

>Paper clip was too big. I had to dig out the piano wire. It's .025" thick.

Re: I've been doing a little turning

#8

Re: Coat hanger wire too thick for.....

Jorge Castaneda~Downeast Maine

>John,

You could use a hypodermic needle so you can blow air while you hollow...

Nice work!

Jorge

Re: I've been doing a little turning

#9

Now your thinking. What do you think the police

John Lucas

>will say when I get stopped with hypodermic needles in my car. Officer, I need them to clear the swarf out of my hollow vessels. I'll be in jail next to Bubba. He'll ask what are you in here for. I'll say making miniature hollow vessels.

Re: I've been doing a little turning

#10

Mike Stafford

Re: I've been doing a little turning

Mike Stafford

>Amazing, John! My first thought upon seeing this was that it was turned from a peach pit.

I am not sure I can swing this size work on my lathe....

Merry Christmas!

Re: I've been doing a little turning

#11

here is a peachpit 

bob davis5098

>


img

Re: I've been doing a little turning

#12

another view 

bob davis5098

>


img

Re: I've been doing a little turning

#13

Mike Stafford

Excellent Bob!

Mike Stafford

>

Re: I've been doing a little turning

#14

Excellent

john lucas

>

Re: I've been doing a little turning

#15

Is This a Post Your Miniatures Thread?

Texian

>

Re: I've been doing a little turning

#16

Both too big to be a burial urn for my pet flea.

GalenV in Iowa

>

Re: I've been doing a little turning

#17

John, I have some bigger pieces of wood...

Gary Evans--Tallassee TN

>that you can have if you can't afford anything bigger than that. 8^]

Gary

Re: I've been doing a little turning

#18

Wow - very cool

Randy Gleckler

>Nice work.. amazes me these miniatures you do. And then the great pics you have of them. Nice work.

Re: I've been doing a little turning

#19

I'll say it again...

Don Orr

>...you amaze me John ! Very cool.

Re: I've been doing a little turning

#20

Thanks Randy

John Lucas

>I had fun trying to make the lighting look just like it would if It was full size. I really need to rig up some fiber optics so that I have a really small light source.

Re: I've been doing a little turning

#21

I believe I can turn one small enough. :)

John Lucas

>

Re: I've been doing a little turning

#22

Re: I believe I can turn one small enough. :)

GalenV in Iowa

>John

I'll skip the requirement for a threaded lid to make it easy on you!

Galen

Re: I've been doing a little turning

#23

Thanks :)

john lucas

>

Re: I've been doing a little turning

#24

Re: Now your thinking. What do you think the polic

xeddog

>You could just say you are an adict. (woodturning that is)

xeddog