Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Elliptical chucking *LINK*

Posts

Elliptical chucking *LINK*

#1

Elliptical chucking *LINK*

Ed Davidson

>I�ve always admired Hans Weissflog�s work � in particular his elaborate elliptical double grove-cut embellished pieces. Recently discovered a pretty easy way to make flat disk with similar elliptical cuts. This 2" maple disk was turned with the help of an offset or elliptical �pendant backer plate� that uses double sided tape to hold the piece in place. I'll probably use this piece as a box lid embellishment. If you�d like to see this new offset turning backer plate in action, there's a link below to a recently published video tutorial. BTW, I have no commercial evolvement with the manufacturer of this new (very cool) tool.


img

Offset Pendant Turning

Re: Elliptical chucking *LINK*

#2

Re: Elliptical chucking

John Lucas

>Ed Thanks for posting. I do the same thing using just a block of wood and 2 jaws removed from my chuck. I really like the metal piece. I will have to build one of those. I'll bet you could build one out of plastic decking material. It threads really well. You made my day.

Re: Elliptical chucking *LINK*

#3

Re: Elliptical chucking

Mark Trenier

>For those of us without metal turning ability, where can you buy one?

Re: Elliptical chucking *LINK*

#4

Re: Elliptical chucking

Ed Davidson

>Mark,

At the end of the video (link above), you'll find email and website contact info for the backer plate manufacturer, Richard Joyner. I know he's already sold hundreds of these little jig sets. The price for the one I have seemed pretty reasonable.

Re: Elliptical chucking *LINK*

#5

Re: Elliptical chucking

bowlman

>I tried the URL www.creativependesign.com, but ... nothing to indicate Richard Joyner or the elliptical backer plate, etc. Ed, can you give us more detailed info?

Re: Elliptical chucking *LINK*

#6

Re: Elliptical chucking

D. Hansen

>Try the International Association of Pen Turners. Richard Joiner used the pen name sailing_away. You have to chase him down but I think he was also at creative design. The IAP web site has considerable info on pendants and Joiner's backing plates. Try either backing plate or pendants on those sites.

Re: Elliptical chucking *LINK*

#7

Re: Elliptical chucking

D. Hansen

>Here is Richards contact

http://www.creativependesign.com You'll have to send him an email since he has not yet placed the backer plate in his products list.

Re: Elliptical chucking *LINK*

#8

Re: Elliptical chucking

D. Hansen

>oops forgot to include his email richard@creativependesign.com

As I remember the cost was in the $50 or so range but that was some time ago

Re: Elliptical chucking *LINK*

#9

Re: Elliptical chucking

Jeff Brockett

>I ordered one of the elliptical chucking plates from Richard Joyner December 15 and it showed up on my front door step Saturday. It is very well made and looks like it will be user friendly. There are no instructions included with this, but the video is very user friendly. Will give it a test run and report on how it works out.

Re: Elliptical chucking *LINK*

#10

Re: Elliptical chucking

D. Hansen

>It is pretty easy to use. When I change a hole or move the piece around the circumference of the plate I usually hold a pencil on the tool rest at the point I expect to hold a gouge and rotate the piece. Keeps me form cutting whee I didn't expect to. Also the pencil mark helps to show me where to cut. If the cut is not where I want I just loosen the back screws and reposition the pendant.

Re: Elliptical chucking *LINK*

#11

Dick Hines

Re: Elliptical chucking

Dick Hines

>What is the price of one of the chucks?

Re: Elliptical chucking *LINK*

#12

Re: Elliptical chucking

Jeff Brockett

>Price was $45.95 and included shipping.

Re: Elliptical chucking *LINK*

#13

Dick Hines

Re: Elliptical chucking

Dick Hines

>Thanks Jeff.