Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Why are we using a lathe :) *LINK*

Posts

Why are we using a lathe :) *LINK*

#1

Why are we using a lathe :)  *LINK*

John Lucas

>


http://www.amazon.com/gp/product/1565234332/ref=s9_newr_gw_ir01?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0V74X0RK9JSKFAC2ZRFJ&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846

Re: Why are we using a lathe :) *LINK*

#2

Hhhhhmmmmmm. Interesting

Norm Smith

>

Re: Why are we using a lathe :) *LINK*

#3

We'll never know, they are out of stock

Marc Phillips

>

Re: Why are we using a lathe :) *LINK*

#4

Steven Antonucci

The future of Woodturning is in the blade

steve antonucci

>Better give Doug Thompson a quick heads up that he needs to figure out how to start making saw blades. Sure would clean up the shop, though...

s

Re: Why are we using a lathe :) *LINK*

#5

Dick Hines

Re: Why are we using a lathe :)

Dick Hines

>I don't have a scroll saw so I guess I will have to keep spinning my bowls.

Re: Why are we using a lathe :) *LINK*

#6

because we can 8>)

Jeff Willaford

>

Re: Why are we using a lathe :) *LINK*

#7

Keith Tompkins

Re: Why are we using a lathe :)

Keith Tompkins

>John, this raises a disturbing question: If the bowl is not entirely produced on the scroll saw, is it still considered a scroll-sawing? At what point does it become a non-turned turning rather than a pure scrolling? Scroll-saw operators of the world unite....before it's too late! I may be inspired to fire up my 1952 Delta scrollsaw.

Re: Why are we using a lathe :) *LINK*

#8

Re: Why are we using a lathe :)

Charles Yawn

>I have ordered this book about two weeks ago. Do scroll-saw and lathe playing. The scroll saw is good for straight-sided work, but will not replace the gentle and smooth curves done on the lathe. At least in my shop. Two different techniques and methods. Charles

Re: Why are we using a lathe :) *LINK*

#9

She is actually kinda famous

Ralph

>As I recall, she has done turning and worked out this method as she was unhappy with all the wood that turning "wastes".

Re: Why are we using a lathe :) *LINK*

#10

Re: Why are we using a lathe :)

Texian

>About 30 years ago I bought my first lathe after reading an article in Wood Magazine about a fellow who cut rings with a saber/jig saw, laminated them together, and sanded the resulting blank into a bowl. Thought I could do it easier with a lathe, and decided to try.

Re: Why are we using a lathe :) *LINK*

#11

I'm a scroll saw person also

john lucas

>but it's just like the lathe to me, just a tool toward the end product.

Re: Why are we using a lathe :) *LINK*

#12

Re: Why are we using a lathe :)

john lucas

>I did the bandsaw version of these as some of my first bowls. It was an article in Finewoodworking that got me going on those.

Re: Why are we using a lathe :) *LINK*

#13

Re: Why are we using a lathe :)

john lucas

>Keith I sold my Delta scroll saw to buy the Dewalt. Both cut about the same with the same quality but the blade changing is easier on the Dewalt. I use it frequently for all kinds of things.

Re: Why are we using a lathe :) *LINK*

#14

Re: Why are we using a lathe :)

Texian

>John, Do you still have any of those first bowls?

Re: Why are we using a lathe :) *LINK*

#15

Re: Why are we using a lathe :)

Ed in Sptbg.

>Looks like the technique is similar to the "Ringmaster" tool.

Re: Why are we using a lathe :) *LINK*

#16

Re: Why are we using a lathe :) *LINK*

john lucas

>No those are long gone. That was something like 25 years ago. I have been thinking about doing some more. It makes a good demo because people have not seen that technique and new turners are always trying to find wood to make bowls. This technique can be done with the scroll saw, bandsaw and even the lathe (similar to the ringmaster but cut by hand)

Micheal Mode make some incredible versions of these. He took it way beyond what I was doing.


http://www.michaelmode.com/

Re: Why are we using a lathe :) *LINK*

#17

Re: Why are we using a lathe :)

Texian

>Cool stuff by Michael Mode. Somewhat shape-limited with BFB technique. About that same time (~25 years ago) I built a ring cutting jig for my C'man monotube after seeing the ringmaster at a show. Still use the parting tool, made from a long carving knife, but it's a lot shorter now.

Re: Why are we using a lathe :) *LINK*

#18

Stirring the Pot Keith ;-))

Don Orr

>Now that's just funny !