Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

DIY Steady Rest Question - Wheels?

Posts

DIY Steady Rest Question - Wheels?

#1

DIY Steady Rest Question - Wheels?

Joe in a Cleveland Suburb

>Hello.

I'm making a steady rest. So far it's going well. I need to get some roller blade wheels.

Did you make a steady rest? What did you use for wheels? Where'd you get them? I can't find replacement wheels at places like Target or Wal-Mart.

I see on-line, Dick's Sporting Goods has them (replacement wheels) but it looks like they don't come with the bearings. Are they needed for this use?

Thanks.

Re: DIY Steady Rest Question - Wheels?

#2

Re: DIY Steady Rest Question - Wheels?

john lucas

>Go to Goodwill. You can by used skates really really cheap. I think I paid$3 and got 8 wheels.

Re: DIY Steady Rest Question - Wheels?

#3

Re: DIY Steady Rest Question - Wheels?

Dave Belser

>I would strongly recommend using scooter wheels. I found mine at Dick's Sporting goods. The reason I would recommend them is that

1. They come with bearings.

2. They are a larger diameter.

3. They were cheaper than inline skate wheels.

The larger diameter means that you can get more "reach" on them if you mount them is slots. This was my first design. My second design used swing arms so the diameter is not as important. But the extra size still gives you more room for the mounting.

Your mileage may vary (particularly if you find used skates a set of used skates)

- Dave

Re: DIY Steady Rest Question - Wheels?

#4

Keith Tompkins

Re: DIY Steady Rest Question - Wheels?

Keith Tompkins

>Hi Joe, I used scooter wheels, they're bigger and come with bearings. I have inline wheels as well which give me more clearance for larger turnings. You can buy bearings at K mart, if not, any skate shop. You may need a spacer between the bearings.

Re: DIY Steady Rest Question - Wheels?

#5

Re: DIY Steady Rest Question - Wheels?

Carol Reed - home in Strawberry

>That's where I got mine! And they have bearings.

Re: DIY Steady Rest Question - Wheels?

#6

Re: DIY Steady Rest Question - Wheels?

Dave Belser

>Looks like Dick's has "Rip Stick" replacement wheels at $19.99 for set of 2 with bearings.

Re: DIY Steady Rest Question - Wheels?

#7

Amazon has scooter wheels for $6 a set

Dave Belser

>

Re: DIY Steady Rest Question - Wheels?

#8

Re: DIY Steady Rest Question - Wheels?

Lewis Dodd

>Well, I went to a St. Vincent de Paul store (a resale store) and bought the store out of all the roller blades they had on hand. You get four rollers per set. Made a steady rest and an out feed stand. Works great. Goodwill stores have them also.

Lewis

Re: DIY Steady Rest Question - Wheels?

#9

Another Vote for Thrift Store Skates!

Dave (PacNW)

>Usually Around $3 to $4 a pair And they come in several sizes and condition!

Re: DIY Steady Rest Question - Wheels?

#10

Re: DIY Steady Rest Question - Wheels?

Tery Scott

>I borrowed the wheels out of my girls roller blades ,they didn't work that good as they melted with the friction on one side

My kids still wonder why there roller blades go bump bump bump

Re: DIY Steady Rest Question - Wheels?

#11

Resale

Joe in a Cleveland Suburb

>I never thought of a resale shop of Goodwill store.

Thanks for the ideas!

Re: DIY Steady Rest Question - Wheels?

#12

Roller Blade Wheel Caution

Stuart Johnson

>Be sure to clean the used wheels. If they have been used they will be full of dirt and grit. I wrap a piece of blue painter's tape around where the wheels will touch.

Re: DIY Steady Rest Question - Wheels?

#13

lgoodwill also,with bearings

bob davis5098

>

Re: DIY Steady Rest Question - Wheels?

#14

Re: Roller Blade Wheel Caution

Joe in a Cleveland Suburb

>I wondered about that, thanks Stuart.

Re: DIY Steady Rest Question - Wheels?

#15

Caution: Alignment

A. Kapocius

>Did the Goodwill/resale shop source for in line skate wheels. The wheels were plastic and melted as described. My lament on this site brought a response that the wheels have to be square to the piece. Haven't had time to get back to the project to verify.

Al Kapocius

Re: DIY Steady Rest Question - Wheels?

#16

Re: Resale

patrick stein

>ebay

Re: DIY Steady Rest Question - Wheels?

#17

Re: DIY Steady Rest Question - Wheels?

Joe in a Cleveland Suburb

>Thanks again for the replies. Just wanted to let you all know I went to the Goodwill store last night and bought a pair of roller blades. They look brand new without a scratch on the wheels. $10.

:)

Re: DIY Steady Rest Question - Wheels?

#18

Re: DIY Steady Rest Question - Wheels?

Glenn Madsen---in SF Bay Area

>I went to three stores, and found bupkis. Good that you got what you were looking for. I guess it's Dick's for me...